Table of Contents
Advertisement
Use the Scan Demo App
Use the Scan Demo app to read barcodes or to test your symbology decode settings.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap the Demos app.
3. Swipe left or right on the screen until Scan Demo appears under the turntable.
Tap the center of the box image to open the app.
4. Point the scanner window at the barcode.
5. Press and hold the right, left, or rear scan button or tap and hold the on-screen
SCAN button.
6. Center the aiming beam over the barcode. Make sure the entire barcode is
inside the illumination frame.
7. Release the Scan button when the computer beeps. Barcode information
appears on the screen.
.
Note: In the Scan Demo app, not all barcode symbologies are enabled by default. If a
barcode does not scan, the correct symbology may not be enabled.
Change the Scan Demo Symbology Settings
1. In the Scan Demo app, tap in the upper right corner of the screen.
2. Select Symbology Settings.
3. Modify the symbology parameters.
•
•
4. Tap Back to return to the Scan Demo app.
42
Tap the check box next to a symbology name to enable (check mark) or
disable (no check mark) decoding for that symbology.
Tap the symbology name to view and modify additional configuration
parameters for the symbology selected.
DRAFT - 3/24/23
EDA10A Enterprise Tablet User Guide
Advertisement
Table of Contents
