Setting
Launch Browser
Scan to Intent
Launch EZ Config
Data Intent
Symbology Settings
Use the Symbology Settings to enable or disable barcode symbologies for the
selected scan setting profile.
•
Tap the check box next to a symbology name to enable (check mark) or disable
(no check mark) decoding for that symbology.
•
Tap the symbology name to view and modify additional configuration
parameters for the symbology selected.
To view a list of default settings for supported symbologies, see
Decode Settings
Adjust the Decode Settings when scanning barcodes that are densely packed or
poor quality.
34
DRAFT - 3/24/23
Description
Enable or disable URL barcode handling.
If a barcode starts with http:// or https://, the browser
opens using the barcode data as a URL.
Corresponds to BarcodeReader property:
PROPERTY_DATA_PROCESSOR_LAUNCH-BROWSER
Enable or disable special handling of scan-to-intent
barcodes.
Applies to barcodes in one of the following formats:
'//' ACTION
'//' ACTION '$' extra-data
Where: ACTION and extra-data are any string of
characters.
Launches an application listening for the intent.
Intent action:
"com.honeywell.scantointent.intent.action." + ACTION
Intent extra:
"com.honeywell.scantointent.intent.extra.DATA" contains
the remainder of the barcode data after the first '$'
character.
Corresponds to BarcodeReader property:
PROPERTY_DATA_PROCESSOR_SCAN_TO_INTENT
Enable or disable special handling of EZConfig barcodes.
Applies to EZConfig barcodes that are encoded with the
Aztec symbology and contain specific header data.
Corresponds to BarcodeReader property:
PROPERTY_DATA_PROCESSOR_LAUNCH_EZ_CONFIG
Enables the reception and processing of barcode data
without using an SDK or library.
EDA10A Enterprise Tablet User Guide
Default
Enable
Enabled
Enabled
Disabled
page
84.