Provision Esim - Honeywell ScanPal EDA10A User Manual

Dual SIM Dual Standby Mode
The nano-SIM and eSIM can be provisioned with either the same or different
mobile carriers. When both SIMs are provisioned, the EDA52 operates in Dual SIM
Dual Standby (DSDS) mode. In this mode, both SIMs can connect to the selected
mobile network. For example, you can have two phone lines on your mobile
computer where one is your business number and one is your personal number.
You can also choose which SIM to use for specific actions, such as calls or
messaging. These actions are defined in Settings > Network & internet > Mobile
network.

Provision eSIM

To connect to a mobile network using embedded SIM, the eSIM must be
provisioned by downloading and enabling an operational profile. ScanPal devices
use the eSIM Toolkit app to download carrier profiles into the eSIM chip and
manage the downloaded profiles.
Devices are enrolled by scanning a QR code. You can also manually enter a code
provided by the carrier. Contact your mobile carrier to obtain the QR code and any
other information required to activate the profile.
Note: Multiple profiles can be downloaded to the eSIM, but only one profile can be active.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap the eSIM Toolkit app.
3. Download the profile by scanning or entering a QR code:
a. If you have a QR code from the carrier, tap Scan Download. Scan the QR
b. If you have an image of the QR code on the tablet, tap Choose from album
c. If you do not have the QR code to scan but have an activation code from
4. A prompt indicates that the download was successful.
5. Tap the LUI button.
The profile is shown under Enabled carriers.
The Access Point Name (APN) for most global mobile operators is integrated in the
eSIM firmware. If the APN for your carrier is not integrated, you will need to
manually enter the APN settings in Settings > Network & internet > Mobile plan.
44
code by keeping the code centered in the box.
then select the file.
your provider, tap the Input Download text box. Enter the code in the text
box then tap OK.
DRAFT - 3/24/23
EDA10A Enterprise Tablet User Guide