Removing The Mulching Plug - Makita DLM537 Instruction Manual

Hide thumbs Also See for DLM537:
Table of Contents

Advertisement

CAUTION:
Hold the upper handle firmly so
that it does not drop off your hand. Otherwise, the
handle may fall and cause an injury.
4.
Attach the holders to the handle.
Align the protrusions on the holder with the holes on the
handle so that the protrusions fit in the holes. Position
the cords as shown in the figure.
Fig.4
► 1 . Cord 2. Holder

Removing the mulching plug

1.
Open the rear cover.
Fig.5
► 1 . Rear cover
2.
Remove the mulching plug while holding down the
lever.
Fig.6
► 1 . Lever 2. Mulching plug
1
2
Assembling the grass basket
1.
Pick up the upper clip of the grass basket.
2
1
Fig.7
► 1 . Upper clip
2.
Insert the frame into the grass basket as far as it
will go while holding the handle of the frame.
1
1
Fig.8
► 1 . Handle
NOTICE:
basket. Be sure to insert the frame along the stitch of
the grass basket.
3.
Make sure that there is no sagging on the corners
of the grass basket.
1
Fig.9
8 ENGLISH
Do not insert the handle into the grass

Advertisement

Table of Contents
loading

Table of Contents