Honda PIONEER SXS1000 2016 Owner's Manual page 97

Basic Operation
Temporarily changing gears by operating the shift paddle while AT
mode is selected (except for SXS1000M3)
You can temporarily change gears by operating the shift paddles
even while AT mode is selected.
When operating the shift paddles while AT mode is selected, the
"H" or "L" displayed in the gear position indicator of the multi-
function display changes to a gear position number (1 – 6). (The AT
indicator stays on)
Because the gear change is temporary, the vehicle automatically
returns to normal AT mode under the following conditions:
• When the shift paddles are not operated for a prescribed time
• When the vehicle speed is reduced and automatically downshifts
• When the AT/MT switch is pressed
• When the SPORT switch is pressed
• When the shift select lever is operated
Shift Limit (except for SXS1000M3):
During MT mode, downshifts may not be executed if it causes the
engine to exceed the rev limit.
NOTICE
To prevent clutch damage, do not use the throttle to hold the vehicle
stationary on an incline or try to tow an immovable object.
92
Basic Operation & Driving Guidelines