Honda TALON SXS1000S4X 2022 Owner's Manual

page of 306

/ 306
Contents
Table of Contents
Bookmarks

Table of Contents

Quick Links

2022

Owner's Manual

2022

SXS1000S4X

SXS1000S4XD

Read this manual carefully,

it contains important safety information.

Minimum recommended operator age: 16

Models sold in and used in California:

The removal or modification of evaporative emission-related

Part Number

parts on this OHRV is illegal. Violators may be subject to civil

and/or criminal penalties as provided under California and

federal law.

Table of Contents

Chapters

Table of Contents

Summary of Contents for Honda TALON SXS1000S4X 2022

Page 1 2022 Owner’s Manual 2022 SXS1000S4X SXS1000S4XD Read this manual carefully, it contains important safety information. Minimum recommended operator age: 16 Models sold in and used in California: The removal or modification of evaporative emission-related Part Number parts on this OHRV is illegal. Violators may be subject to civil and/or criminal penalties as provided under California and federal law.
Page 2 This publication includes the latest production information available before printing. Honda Motor Co., Ltd. reserves the right to make changes at any time without notice and without incurring any obligation.
Page 3 2022 Honda TALON X SXS1000S4X SXS1000S4XD OWNER’S MANUAL...
Page 4 Introduction Congratulations on choosing your Honda Talon X. When you own a Introduction Honda, you’re part of a worldwide family of satisfied customers– people who appreciate Honda’s reputation for building quality into every product. Before you begin driving your vehicle, we recommend that you read this owner’s manual.
Page 5 Introduction • The following codes in this manual indicate the country. SXS1000S4X United States of America - 49 states, Australia, New Zealand United States of America - 50 states (meets California) SXS1000S4XD United States of America - 49 states, Australia, New Zealand United States of America - 50 states (meets California) •...
Page 6 Your safety, and the safety of others, is very important. And A Few Words About Safety operating your Honda safely is an important responsibility. To help you make informed decisions about safety, we have provided operating procedures and other information on labels and in this manual.
Page 7 A Few Words About Safety Safety Headings — such as “Important Safety Reminders” or “Important Safety Precautions.” Safety Section — “Driver & Passenger Safety,” beginning on page 1. Instructions — how to operate this vehicle correctly and safely. In addition to the above, your owner's manual is full of information that can help you safely operate and maintain your vehicle.
Page 8: Table Of Contents
Before Driving................75 The importance of wearing a seat belt, helmet, protective eyewear and other protective gear, how to make sure you and your Honda are ready to drive, plus load limits and guidelines on carrying cargo.
Page 9 ID numbers, technical specifications, and other technical facts. Consumer Information (USA only) ........275 Information on warranties, emissions controls, how to get a service manual, and how to contact Honda. Index ..................281 Alphabetical listing of topics in the manual. Quick Reference Handy facts about fuel, engine oil, tire sizes, and air pressure.
Page 10: Driver & Passenger Safety
This section presents some of the most important information and Driver & Passenger Safety recommendations to help you drive your Honda safely. Please take a few moments to read these pages. This section also shows you the location of safety labels on your vehicle.
Page 11 Important Safety Information There is much that you can do to protect yourself and your passengers. You’ll find many helpful recommendations throughout this manual. The following are those we consider to be most important. Follow Age and Size Recommendations The driver should be at least 16 years old and tall enough to wear the seat belt properly and reach all the controls.
Page 12 It’s important to keep your vehicle properly maintained and in safe operating condition. Having a breakdown can be difficult, especially if you are stranded far from your base. To help avoid problems, inspect your Honda before each use and perform all recommended maintenance. Don't Drink or Use Drugs and Ride Alcohol or drugs and riding don't mix.
Page 13 Accessories & Modifications Modifying your vehicle or using non-Honda accessories can make it unsafe. Before you consider making any modifications or adding an accessory, be sure to read the following information. Accessories We strongly recommend that you use only Honda Accessories that have been specifically designed or approved and tested for your vehicle.
Page 14 Modifications We strongly advise you not to remove any original equipment or modify your Honda in any way that would change its design or operation. Such changes could seriously impair your vehicle’s handling, stability, and braking and make it unsafe to drive.
Page 15 You, and anyone else who operates or rides in the vehicle, should read and understand this information before driving. The labels should be considered permanent parts of the vehicle. If a label comes off or becomes hard to read, contact your Honda dealer for a replacement. Indicates something apparent.
Page 16 Safety Labels tire & overload warning OSHA loading warning Driver & Passenger Safety...
Page 17 Safety Labels general warning general warning tag Driver & Passenger Safety...
Page 18 Safety Labels shift select lever information rear passenger warning Driver & Passenger Safety...
Page 19 This page intentionally left blank. Driver & Passenger Safety...
Page 20: Instruments & Controls
Instruments & Controls The items listed below are described in this section. Instruments & Controls Operation Component Locations ..........13 Indicators & Displays ..............17 Neutral Indicator..............19 Reverse Indicator ..............19 Electric Power Steering (EPS) Indicator........19 High Coolant Temperature Indicator ........19 PGM-FI Malfunction Indicator Lamp (MIL) ........
Page 21 Instruments & Controls Driver Controls ................38 Ignition Switch................. 38 Headlight Switch ..............39 Shift Select Lever ..............40 Drive Mode Select Switch ............41 AT/MT Switch ................43 SPORT Switch ................44 Hill Start Assist (HSA) Switch ............ 45 LAUNCH MODE Switch............
Page 22: Operation Component Locations
Operation Component Locations right rear side net (page 53) right front side net front passenger (page 53) seat belt left rear seat belt (page 59) (page 59) right rear seat belt (page 59) driver seat belt right rear door (page 51) (page 59) right front door (page 51)
Page 23 Operation Component Locations left rear side net (page 53) left front side net flag pole bracket (page 53) (page 71) left front door (page 51) cargo bed (page 70) left rear door (page 51) Instruments & Controls...
Page 24 Operation Component Locations indicators & displays (page 17) steering wheel adjustment lever (page 49) downshift upshift shift select lever paddle paddle (page 40) (page 48) (page 48) headlight switch (page 39) FLV switch (SXS1000S4XD only) (page 47) driver seat position adjustment seat lever (page 58) Instruments &...
Page 25 Operation Component Locations front passenger front accessory power socket handhold lock lever (page 69) (page 65) ignition switch front passenger handhold (page 64) (page 38) drive mode AT/MT switch, select switch SPORT switch (page 41) (page 43, 44) hill start assist (HSA) switch, LAUNCH MODE switch rear accessory (page 45, 46)
Page 26: Indicators & Displays
Indicators & Displays The indicators and displays on your Honda SXS keep you informed, alert you to possible problems, and make your driving safer and more enjoyable. Refer to the indicators frequently. Their functions are described on the following pages.
Page 27 Indicators & Displays PGM-FI malfunction electric power steering indicator lamp (MIL) (EPS) indicator neutral indicator reverse indicator seat belt indicator I - 4WD indicator multi-function display FLV SPORT SEL/SET high coolant indicator switch temperature (SXS1000S4XD hill start indicator only) assist (HSA) low oil pressure FLV NORMAL indicator...
Page 28: Neutral Indicator
Indicators & Displays Neutral Indicator This indicator comes on and stays on when the transmission is in neutral. Reverse Indicator This indicator comes on and stays on when the transmission is in reverse. Electric Power Steering (EPS) Indicator This indicator comes on when the ignition switch is turned ON (q) and remains on until the engine is started.
Page 29: Low Oil Pressure Indicator
Indicators & Displays Low Oil Pressure Indicator This indicator comes on when the ignition switch is turned ON (q) and remains on until the engine is started. This indicator comes on and stays on when the engine oil pressure is low enough to cause engine damage.
Page 30: Flv Warning Indicator (Sxs1000S4Xd Only)
Indicators & Displays FLV Warning Indicator (SXS1000S4XD only) This indicator comes on briefly when the ignition switch is turned ON (q). This indicator comes on and stays on when there is a problem with your vehicle’s FOX ® Live Valve (FLV) system. If this happens, reduce speed and take your vehicle to a dealer as soon as possible.
Page 31 Indicators & Displays Multi-function This display includes the following display functions. Speedometer Shows driving speed in miles or kilometers per hour (page 25). Tachometer Shows the engine rpm (page 26). Fuel gauge Shows approximate fuel supply available (page 27). Odometer display Shows the odometer, tripmeter, coolant temperature gauge, hour meter, maintenance tripmeter and...
Page 32 Indicators & Displays Display Check When the ignition switch is turned ON (q), the multi-function display will temporarily show all the modes and digital segments and initial message. This indicates that the liquid crystal display is functioning properly. If any part of this display does not come on when it should, have your dealer check for problems.
Page 33: Multi-Function Display
Indicators & Displays Multi-function Display The multi-function display consists of the following function displays: • Speedometer • Gear position indicator • Tachometer • AT indicator • Fuel gauge • MT indicator • Odometer display • LOW indicator • Maintenance minder •...
Page 34: Speedometer
Indicators & Displays Speedometer This display shows speed in miles or kilometers per hour. Mileage Unit Change The speedometer, odometer, tripmeter, and maintenance tripmeter show in either “MPH” and “MILE” or “KM/H” and “KM”. To change the mileage unit, press and hold the SEL/SET switch for more than 5 seconds in odometer mode (page 28) with the vehicle stopped.
Page 35: Tachometer
Indicators & Displays Tachometer This display shows the engine speed in revolutions per minute (rpm). Do not operate the engine in the tachometer red zone. Excessive engine speed can adversely affect engine life. tachometer tachometer red zone Instruments & Controls...
Page 36: Fuel Gauge
Indicators & Displays Fuel Gauge The fuel gauge shows the approximate fuel supply available. The fuel tank capacity is: 7.66 US gal (29.0 ℓ) fuel gauge When the last segment blinks, you should refill the tank as soon as possible. The amount of fuel remaining when the blinking starts is approximately: 0.90 US gal (3.4 ℓ) Fuel gauge failure:...
Page 37: Odometer Display
Indicators & Displays Odometer Display This display includes the odometer, tripmeter, coolant temperature gauge, hour meter, maintenance tripmeter, and maintenance hour meter. Each time you press the SEL/SET switch, the mode will change as shown in the illustration. Odometer (page 29) Hour meter (page 32) Tripmeter A (page 29) Volt meter (page 32)
Page 38 Indicators & Displays Odometer The odometer shows the total miles or kilometers ridden with the TOTAL display. The odometer locks at 999,999 when the readout exceeds 999,999. odometer TOTAL display Tripmeter The tripmeter shows the number of miles or kilometers ridden since you last reset the tripmeter A or B.
Page 39 Indicators & Displays Coolant temperature gauge The coolant temperature gauge shows engine coolant temperature with the coolant temperature display. When the segment begins to move above the C (Cold) display, the engine is warm enough for the SXS to be ridden. When the coolant temperature is low, the coolant temperature gauge will display “Lo”.
Page 40 Indicators & Displays Coolant temperature gauge failure: If the coolant temperature system has an error, the coolant temperature gauge will blink and appear in the display, and the high coolant temperature indicator will turn on. If this occurs, see your dealer as soon as possible. high coolant temperature indicator coolant temperature gauge...
Page 41 Indicators & Displays Hour meter The hour meter display shows the accumulated hours the ignition is ON (q). The hour meter locks at 99,999.9 when the readout exceeds 99,999.9. hour meter display hour meter Volt meter The volt meter shows the current battery voltage. VDC display volt meter Instruments &...
Page 42: Maintenance Minder Indicator
Indicators & Displays Maintenance Minder Indicator The maintenance minder indicator appears in the display when the mileage or operating hours on your Honda SXS reach the maintenance interval specified on the maintenance schedule (page 121). Reset the indicator after each scheduled maintenance is performed.
Page 43: Digital Clock
Indicators & Displays Digital Clock The digital clock shows the hour and minutes with the 12-hour clock display. To set the time: 1. Turn the ignition switch to ON (q). 2. Change to the hour meter display (page 28). 3. Press and hold the SEL/SET switch until the hour digits start flashing.
Page 44: Gear Position Indicator
Indicators & Displays Gear Position Indicator The gear position indicator shows the selected shift position by the shift select lever (page 40). The indicator displays: P for park, N for neutral, R for reverse, H for high-range, L for low-range, and 1 – 6 for gear positions (shift paddles operation).
Page 45: At Indicator / Mt Indicator / Low Indicator
Indicators & Displays AT Indicator / MT Indicator / LOW Indicator These indicators display the transmission mode of the SXS. The indicators display: AT for automatic shift mode, MT for manual shift mode. To switch between AT mode and MT mode, press the AT/MT switch (page 43).
Page 46: Drive Mode Indicator
Indicators & Displays Drive Mode Indicator The drive mode indicator shows the selected drive mode by pressing the drive mode select switch (page 41, 97). drive mode indicator drive mode select - 4WD switch position drive mode indicator The drive mode indicator will flash between 2WD mode and I - 4WD mode for various conditions.
Page 47: Driver Controls
Driver Controls Ignition Switch The ignition switch is a three-position, key-operated switch used to start and stop the engine. OFF (w) — The engine and all electrical circuits are off. The key can be inserted and removed only when it is in this position. ON (q) —...
Page 48: Headlight Switch
Driver Controls Headlight Switch The headlight switch is located on the left side of the steering wheel, has three positions: OFF, LO and HI. This switch turns the headlights and taillights on and off, and changes between low beam or high beam. For example: To change the headlight position from OFF to HI: press the HI side of headlight switch until you feel two clicks.
Page 49: Shift Select Lever
Driver Controls Shift Select Lever Your Honda SXS is equipped with an automatically controlled 6-speed transmission. The shift select lever, located on the center console, has five positions: park (P), reverse (R), neutral (N), high-range (H), and low-range (L). shift positions...
Page 50: Drive Mode Select Switch
Driver Controls Drive Mode Select Switch The drive mode select switch, located on the center console, has two drive modes: 2WD and I - 4WD (page 97). You can switch between 2WD mode and I - 4WD mode by pressing the drive mode select switch at any time the engine is running;...
Page 51 Driver Controls To check your present drive mode, look at the drive mode indicator. drive mode select - 4WD switch position drive mode indicator The drive mode indicator will flash between 2WD mode and I - 4WD mode for various conditions. •...
Page 52: At/Mt Switch
Driver Controls AT/MT Switch The AT/MT switch is located on the center console. When the shift select lever is in high-range (H) or low-range (L) position, you can switch between AT mode and MT mode by pressing the AT/MT switch. AT/MT switch Instruments &...
Page 53: Sport Switch
Driver Controls SPORT Switch The SPORT switch is under the AT/MT switch. When AT mode is selected and the shift select lever is in the high- range (H) position, you can switch between turning SPORT mode on and off by pressing the SPORT switch. When the shift select lever is in the low-range (L) position, SPORT mode will not turn on even if the SPORT switch is pressed.
Page 54: Hill Start Assist (Hsa) Switch
Driver Controls Hill Start Assist (HSA) Switch The Hill Start Assist (HSA) switch is located on the center console. HSA keeps the brake pressure applied briefly to help prevent the vehicle from rolling on inclines as you move your foot from the brake pedal to the accelerator pedal.
Page 55: Launch Mode Switch
Driver Controls 4. Release the pressure from the brake pedal and apply the accelerator. – HSA is active for 1.5 seconds or until the accelerator is applied. HSA will self cancel if the accelerator is not applied within 1.5 seconds of pushing the HSA button. –...
Page 56: Fox ® Live Valve (Flv) Switch (Sxs1000S4Xd Only)
Driver Controls Live Valve (FLV) Switch (SXS1000S4XD only) ® The FLV switch is located on the left side of the steering wheel, and has two modes: NORMAL mode and SPORT mode. The FLV switch is used to change between NORMAL mode and SPORT mode of FOX Live Valve (FLV) system.
Page 57: Shift Paddles
Driver Controls Shift Paddles Your Honda SXS is equipped with a pair of shift paddles that are located behind the steering wheel. downshift paddle (-) upshift paddle (+) Pull the upshift paddle (+) to shift to a higher gear position and the downshift paddle (-) to shift to a lower gear position.
Page 58: Steering Wheel Adjustment Lever
Driver Controls Steering Wheel Adjustment Lever Your Honda SXS is equipped with a height-adjustable steering wheel. Adjust the steering wheel position so that you can comfortably grip the steering wheel in an appropriate driving posture. WARNING WARNING Adjusting the steering wheel position while driving may cause you to lose control of the vehicle and be seriously injured in a crash.
Page 59 Driver Controls Adjustment 1. Hold the steering wheel and pull the steering wheel adjustment lever up towards you. 2. While pulling the steering wheel adjustment lever towards you, adjust the steering wheel position. 3. Release the steering wheel adjustment lever. 4.
Page 60: Doors
If a door is damaged or does not close securely, see your dealer for repair or replacement. Do not drive the Honda SXS with the doors open or removed. All doors can be opened and closed in the same manner.
Page 61 Doors If the doors rattle when closed, turn the door stopper counterclockwise to adjust the doors. Each door has a double latching mechanism. Adjust the door stoppers so that it latches on the second click. All doors can be adjusted in the same manner. Adjustment 1.
Page 62: Side Nets
Side Nets Your Honda SXS is equipped with side nets to prevent branches, or other debris from getting inside the driver’s compartment, and to keep the driver’s and passenger’s hands and arms inside the occupant protective structure (OPS) if the vehicle ever tips or overturns.
Page 63: Side Nets Set Up
Side Nets Side Nets Set Up All side nets can be set up in the same manner. Inspect the side nets and their mounting hardware for damage as specified in the maintenance schedule on page 121. 1. Tighten the belts on the side net D-rings. 2.
Page 64: Side Nets Folding In Half
Side Nets Side Nets Folding in Half The side nets can be folded in half to make cleaning and maintaining your Honda SXS a little easier. All side nets can be folded in the same manner. To Fold the Side Net 1.
Page 65: Seat
Seat Seat Your Honda SXS is equipped with four bucket seats that are designed to carry a driver and up to three passengers. CAUTION Driving with cargo on the passenger seats can interfere with the driver's ability to control the vehicle.
Page 66: Driver Seat Position Adjustment
Seat Driver Seat Position Adjustment The driver seat can be adjusted to suit the drivers preference. Adjust the drivers seat to the desired position that allows the driver to maintain full control of the vehicle. The driver should be able to sit upright with back against the seat- back, be able to properly reach the pedals, and be able to grip the steering wheel comfortably with both hands.
Page 67 Seat Adjustment 1. Sit down in the driver seat. 2. Pull up on the seat lever to unlock the seat, while pulling up on the seat lever slide the driver seat to your preferred position. The driver seat adjustment has 6 positions to select from. 3.
Page 68: Seat Belts
Seat Belts Your Honda SXS is equipped with lap/shoulder seat belts in each seating position. A seat belt keeps you connected to the vehicle so you won’t be thrown out during a crash or rollover. Together with a proper helmet, a seat belt is your best protection against serious injuries in any type of crash, so make sure you and your passengers always buckle up before driving.
Page 69 Seat Belts Seat Belt Speed Limiting System When the driver's seat belt is not latched properly, the maximum vehicle speed will be limited by the seat belt speed limiting system. When the driver's seat belt is not latched, the seat belt speed limiting system will: •...
Page 70 Seat Belts How you wear a seat belt also matters. For the best protection: All seat belts can be secured in the same manner. 1. Insert the latch plate into the buckle, then tug on the belt to make sure it is securely latched. latch plate buckle 2.
Page 71 Seat Belts Seat Belt Locking Mechanism The seat belts in your Honda SXS are equipped with a belt locking mechanism. The belt locking mechanism is in the holder of the latch plate. When the seat belt is subjected to intense forces during a crash or rollover, part of the holder locks the belt.
Page 72 Seat Belts If you have been driving in an extremely muddy or dusty area, be sure to inspect your belt and remove any dirt or debris before letting the belt retract into the retractor. Failure to do so could clog the retractor and make it inoperable.
Page 73: Passenger Handhold
Passenger Handhold Passenger Handhold Your Honda SXS has front and rear passenger handholds to give passengers extra support when the vehicle travels over rough or bumpy terrain. The passengers can also brace their feet against the floorboard. front passenger handhold rear passenger handhold Instruments &...
Page 74 Passenger Handhold Front Passenger Handhold Adjustment 1. Release the lock lever. 2. Adjust the handhold position so that the passenger can grip the handhold securely in a comfortable riding posture. 3. Secure the lock lever tightly until it contacts the square pipe. Once the passenger handhold is adjusted correctly, pull it back and forth to make sure it is locked in position.
Page 75 Passenger Handhold If the passenger handhold is not secured firmly, re-tighten the adjusting nut and lock nut of the handhold to the specified torque in the following procedure. 1. Secure the lock lever tightly until it contacts the square pipe. 2.
Page 76: Storage Compartments
Storage Compartments Your Honda SXS has a document compartment, two glove boxes and four drink holders where you can carry small, lightweight items. document glove boxes compartment drink holders Instruments & Controls...
Page 77 Storage Compartments To open the document compartment, turn the knob clockwise. To close the document compartment, turn the knob counterclockwise. owner’s manual storage document compartment close open knob document compartment cover The strage net is located under the driver seat. storage net Instruments &...
Page 78: Accessory Power Socket
Accessory Power Socket Your Honda SXS has two accessory power sockets. The front accessory power socket is located on the right side of ignition switch. The rear accessory power socket is located on the rear end of the center console.
Page 79: Cargo Bed
Cargo Bed See page 84 for Loading Cargo when driving with cargo in the bed. Tie-Down Hooks The cargo bed has tie-down hooks for securing items in the bed. Before using the tie-down hooks, select a firm level surface and shift the shift select lever into the park (P) position.
Page 80: Flag Pole Bracket
Flag Pole Bracket Flag poles are optional equipment available from your Honda dealer. To mount a pole in the bracket, follow the instructions that come with the flag pole kit. Flag poles are required in some driving areas. Check local regulations before driving.
Page 81: Electronic Brakeforce Distribution (Ebd)
Electronic Brakeforce Distribution (EBD) Your Honda SXS is equipped with an Electronic Brakeforce Distribution (EBD). To improve vehicle stability when the brakes are applied, EBD adjusts the braking force distribution between the front and rear brakes according to traction conditions.
Page 82: Electric Power Steering (Eps)
Electric Power Steering (EPS) This SXS is equipped with an electronically controlled, electric power-assisted steering system. While the engine is running, the Electric Power Steering (EPS) system provides power from the electric motor, which helps you to turn the SXS’s steering wheel more easily. The EPS system on this SXS utilizes an overheat protection feature to prevent damage to system components.
Page 83 This page intentionally left blank. Instruments & Controls...
Page 84: Before Driving
Before Driving Before driving your SXS, you need to make sure you and your vehicle Before Driving are both ready. This section discusses how to evaluate your driving readiness and what items you should check on your vehicle. It also includes important information about loading cargo.
Page 85: Are You Ready To Drive
Are You Ready to Drive? Before driving your Honda SXS for the first time, we urge you to carefully read this owner’s manual and the labels on your vehicle and make sure you understand all the safety information. Age & Size Recommendations The driver should be at least 16 years old and tall enough to wear their seat belt properly (page 59) and operate all the controls.
Page 86: Protective Apparel
Are You Ready to Drive? Protective Apparel To help prevent head injury from striking an occupant protective structure (OPS) or other hard object, we recommend that occupants always wear a helmet secured with a chin strap. To protect the eyes from brush and flying objects, we also recommend that occupants wear impact-resistant goggles or a face shield.
Page 87: Get To Know Your Vehicle
Are You Ready to Drive? Get to Know Your Vehicle Because all vehicles have unique characteristics, it’s important to learn how this one operates and handles. We recommend that you take time to practice using the different controls, and get accustomed to how the vehicle accelerates, brakes, and turns in different driving modes, on different surfaces, and on different terrain conditions.
Page 88: Is Your Vehicle Ready To Drive
Is Your Vehicle Ready to Drive? Before driving your Honda SXS, it’s important to inspect the vehicle and correct any problem you find. A pre-drive inspection is a must, not only for safety, but because having a breakdown can be a major inconvenience.
Page 89: Pre-Drive Inspection
Is Your Vehicle Ready to Drive? Pre-drive Inspection Check the following items before driving your Honda SXS: Oil Level Check the engine and sub-transmission oil levels and add oil, if needed (pages 142, 152). Also check under the vehicle for leaks.
Page 90 Is Your Vehicle Ready to Drive? Steering Check the steering to make sure it turns smoothly in both Gearbox and directions. Check that there is no binding or play in the Boots steering. Check for any tears in the boots. If any tears are found, see your dealer.
Page 91 Is Your Vehicle Ready to Drive? Tie-rod Ends The wheels need to be lifted off the ground to correctly check the tie-rod ends, so it cannot be done in the pre-drive inspection. To have the tie-rod ends properly inspected, see your dealer. Cargo Be sure items in the cargo bed are within the cargo limit and are properly secured to prevent shifting...
Page 92 Accumulated debris and vegetation that contact the exhaust can catch on fire. Always conduct a pre-drive inspection and remove accumulated debris. Remember to take care of any problem you find or have your dealer correct it before you drive your Honda SXS. Before Driving...
Page 93: Loading Cargo
Loading Cargo Your vehicle was designed to carry cargo. However, carrying a load that is too heavy or improperly loaded can adversely affect your vehicle’s handling, stability, and stopping distance and make it unsafe. Before carrying any type of cargo, be sure to read the following pages.
Page 94: Loading Guidelines
Loading Cargo Loading Guidelines • Make sure the tires are properly inflated (page 195). • Place all items on the floor of the cargo bed, and as far forward and centered as possible. • Use the tie-down hooks (page 70) to secure any items that could shift position while you are driving.
Page 95 This page intentionally left blank. Before Driving...
Page 96: Basic Operation & Driving Guidelines
Basic Operation & Driving Guidelines This section gives information on how to start and stop your engine. Basic Operation & Driving Guidelines It also provides guidelines for operating on different types of terrain, and driving with cargo. Basic Operation ................88 Starting &...
Page 97: Basic Operation
Basic Operation Starting & Stopping the Engine For safety, we recommend that you start the engine in a well- ventilated area. If that is not practical, move the vehicle outdoors as soon as possible. The engine’s exhaust contains carbon monoxide, a colorless and odorless gas that can cause illness and even death.
Page 98 Basic Operation Starting the engine: 1. Shift the shift select lever into the park (P) position. 2. Press on the brake pedal. 3. Without touching the accelerator pedal, insert the key and turn the ignition switch to the START (p) position. Immediately after the engine starts, let go of the key.
Page 99: Shifting Gears
You can move forward or in reverse by shifting the shift select lever from P or N, to R, H, or L. Your Honda SXS is equipped with a dual clutch transmission, which is an automatically controlled 6-speed transmission. When the shift select lever is in the high-range (H) or low-range (L) position, you can switch between AT mode and MT mode by pressing the AT/MT switch.
Page 100 Basic Operation NOTICE Under extreme constant high load usage, the temperature of the clutch can rise over the allowable temperature limit for the clutch material. In this usage condition, clutch slippage and burning may occur and the clutch temperature indicator may flash. To avoid damaging the clutch, follow the proper usage of the sub- transmission dual range as described.
Page 101 Basic Operation Shift Position and Meter Display gear: P meter: gear: R meter: gear: N meter: gear: 1-6 gear: H mode: AT mode: MT gear: H meter: meter: mode: AT, SPORT meter: gear: L gear: 1-6 mode: AT mode: MT meter: meter: shift the shift select lever...
Page 102 Basic Operation Selecting a Shift Position Your Honda SXS has five shift select lever positions: park (P), reverse (R), neutral (N), high-range (H), and low-range (L). Park: Used when parking or starting the engine. Reverse: Used when driving in reverse.
Page 103 Basic Operation Selecting a AT/MT Mode Your Honda SXS has 2 transmission modes: AT mode and MT mode. AT mode: This mode automatically shifts the gears with optimal timing according to your driving conditions. You can temporarily shift up or down by operating the shift paddles while driving in AT mode.
Page 104 Basic Operation Temporarily changing gears by operating the shift paddle while AT mode is selected You can temporarily change gears by operating the shift paddles even while AT mode is selected. When operating the shift paddles while AT mode is selected, the “H”...
Page 105 Basic Operation Driving by operating the shift paddles while MT mode is selected To upshift the transmission, pull the right side upshift paddle once. To downshift the transmission, pull the left side downshift paddle once. GEAR SHIFTING SEQUENCE downshift paddle (-) upshift paddle (+) After starting the engine and letting it warm up, follow this procedure:...
Page 106: Selecting A Drive Mode
Basic Operation Selecting a Drive Mode You can change the drive mode at any time the engine is running. See page 41 for additional information. This mode supplies power to the rear wheels. This mode is best for surfaces that provide good traction. - 4WD This mode supplies power to the front and rear wheels.
Page 107: Operating Launch Mode
Basic Operation Operating Launch Mode Launch Mode allows the DCT start clutch to be engaged from a high engine speed which increases vehicle acceleration. WARNING WARNING Only use Launch Mode on flat ground, with a clear path in front and sides of your vehicle. Do not use Launch Mode when carrying cargo, on slippery surfaces or when the vehicle is not on flat ground.
Page 108 Basic Operation 4. Make sure the front wheels are pointing straight. 5. Press and hold the brake pedal, shift the shift select lever into the high-range (H) position (page 40). 6. Press and hold the LAUNCH MODE switch until the LAUNCH MODE indicator comes on.
Page 109 Basic Operation 7. With both hands on the steering wheel, pull and hold both shift paddles simultaneously. shift paddles 8. Release the brake pedal and apply the accelerator pedal, pressing the accelerator pedal more than 1/8. accelerator pedal press more brake pedal than 1/8 Basic Operation &...
Page 110 Basic Operation 9. To launch the vehicle, release both shift paddles simultaneously. – If the LAUNCH MODE indicator flashes during steps 6 - 9, release the accelerator pedal and the shift paddles and wait until the LAUNCH MODE indicator goes off. Follow steps 6 - 9 again.
Page 111: Parking
Basic Operation Parking Look for a clear, level parking area with a firm surface. Avoid parking on a slope or on loose or slippery surfaces, if possible. If you must park on a slope, block the wheels to help keep the vehicle from sliding.
Page 112: Driving Guidelines
Follow all safe-driving guidelines in this owner’s manual. Safe Driving Precautions Before driving your Honda SXS for the first time, please review the “Driver & Passenger Safety” section (page 1), the “Before Driving” section (page 75), and the precautions below.
Page 113 RBDC is available at www.ROHVA.org. Off-highway Use Only Your Honda SXS was designed for use on a wide variety of terrain and situations. However, it should not be driven on any public road, paved or unpaved, because it is not equipped to legally or safely drive on such roads.
Page 114: Off-Road Driving Considerations
Your Honda SXS was designed and intended for off-road use. In the event that you must drive on a paved surface, be aware that your Honda SXS will feel and handle different than it does on dirt. The tires will also wear much faster.
Page 115 Driving Guidelines Surface Considerations The kind of surface you drive on can affect how your vehicle handles. For example, on loose or soft surfaces you’ll need more time and distance to accelerate, turn, or brake to a stop. Avoid any sudden sharp turns particularly on pavement and other hard surfaces.
Page 116: Basic Driving
• Allow extra distance to accelerate, turn, and slow or stop. Basic Driving Making Turns The basic turning technique for Honda SXS is to drive at low speed and gradually adjust the amount of steering to suit the surface. Do not make sudden sharp turns, either off-road or on pavement.
Page 117: Driving On Hills
Driving Guidelines Driving on Hills Hills present some of the greatest challenges and hazards, especially if you are carrying cargo. If you are new to off-road driving, start with gentle inclines, take time to learn how your vehicle handles on slopes, and read the information that follows.
Page 118 Driving Guidelines Driving Up a Hill If you decide that it is safe to drive your Honda SXS up a hill: • Select an appropriate drive mode for the hill. When ascending steep hills, shift the shift select lever into low-range (L) position.
Page 119 Driving Guidelines If you decide it is safe to drive down a hill: • Hold the steering wheel firmly and drive straight back down the hill. • Gently apply the brakes to help control speed, but do not “ride” the brakes. Crossing a Hill Before traversing a hill, consider these facts: •...
Page 120: Driving Through Water
NOTICE Water entering the air intake system can cause severe engine damage. If your Honda SXS becomes immersed in water (water level is above the floorboard), do not start the engine. Take your Honda SXS to your dealer for service.
Page 121: Driving At Night
Driving Guidelines Driving at Night If you drive your Honda SXS at night, always drive slower and more cautiously than you would in daylight. Basic Operation & Driving Guidelines...
Page 122: Servicing Your Honda
Servicing Your Honda To help keep your Honda SXS in good shape, this section includes a Servicing Your Honda Maintenance Schedule for required service and step-by-step instructions for specific maintenance tasks. You’ll also find important safety precautions, information on fuels and oils, and tips for keeping your Honda looking good.
Page 123 Servicing Your Honda Clip Removal ................134 Jack-Up Point & Support Point ..........135 Service Procedures Fluids, Filters & Lubricants Fuel ..................136 Engine Oil & Filters ..............139 Sub-Transmission Oil ..............152 Front Final Gear Oil..............156 Rear Final Gear Oil ..............158 Coolant ..................
Page 124: The Importance Of Maintenance
Frequent servicing of the air cleaner is especially important to help you avoid a possible costly engine repair. If your Honda SXS overturns or is involved in a crash, be sure your dealer inspects all major parts, even if you are able to make some repairs.
Page 125: Maintenance Safety
Other tasks that are more difficult and require special tools are best performed by professionals. Removing the wheels should normally be handled only by a Honda technician or other qualified mechanic. Instructions are included in this manual only to assist in emergency service.
Page 126: Important Safety Precautions
Keep cigarettes, sparks, and flames away from all fuel-related parts. Remember that your Honda dealer knows your Honda SXS best and is fully equipped to maintain and repair it. To ensure the best quality and reliability, use only new Honda Genuine Parts or other equivalents for repair and replacement.
Page 127: Maintenance Schedule
Honda dealer knows your Honda SXS best and is fully equipped to maintain and repair it. If you decide to do your own maintenance, use only Honda Genuine Parts or their equivalents for repair or replacement to ensure the best quality and reliability.
Page 128 Maintenance Minder Messages on the Multi-function Display The maintenance minder indicator appears in the multi-function display when the mileage or operating hours on your Honda SXS reaches the maintenance interval specified on the maintenance schedule.
Page 129 * Should be serviced by your dealer, unless the owner has the proper tools and service data, and is mechanically qualified. Refer to the official Honda Service Manual (page 276). ** In the interest of safety, we recommend these items be serviced only by your dealer.
Page 130 * Should be serviced by your dealer, unless the owner has the proper tools and service data, and is mechanically qualified. Refer to the official Honda Service Manual (page 276). Note 1 Inspect valve clearance as needed, if engine is noisy.
Page 131 * Should be serviced by your dealer, unless the owner has the proper tools and service data, and is mechanically qualified. Refer to the official Honda Service Manual (page 276). ** In the interest of safety, we recommend these items be serviced only by your dealer.
Page 132: Maintenance Record
Keeping an accurate maintenance record will help ensure that your Honda SXS is properly maintained. Retain detailed receipts to verify the maintenance was performed. If the Honda SXS is sold, these receipts should be transferred with the Honda SXS to the new owner.
Page 133: Maintenance Component Locations
Indicates something visible. Indicates something concealed. driver seat passenger seat (page 132) (page 132) brake pedal (page 192) accelerator pedal owner’s manual (page 174) (page 130) left rear passenger right rear passenger seat (page 132) seat (page 132) Servicing Your Honda...
Page 134 (page 156) front final gear oil drain bolt (page 157) tool kit (page 129) front arm ball joint boots front arm ball front brake calipers (page 203) joint boots (page 191) (page 203) Servicing Your Honda...
Page 135 (page 166) brake fluid reservoir tank (page 189) brake light rear final gear switch oil drain bolt (page 193) (page 159) sub-transmission oil drain bolt rear brake calipers (page 191) (page 154) engine oil drain bolts (page 144) Servicing Your Honda...
Page 136 (SXS1000S4XD only) (page 183) air cleaner front suspension damping spark plugs housing drain adjuster (SXS1000S4X only) (page 176) tube (page 169) (page 185) steering rack boots (page 203) sub-transmission oil fill cap/dipstick (page 152) driveshaft boots (page 203) Servicing Your Honda...
Page 137 (page 186) housing drain tube (page 169) spark arrester (page 179) battery (page 204) electric power steering (EPS) fuse driveshaft boots brake traction control system (page 203) (BTCS) fuse radiator fan fuse(page 247) Servicing Your Honda...
Page 138: Tool Kit
An optional, larger tool kit may be available. Check with your dealer’s parts department. UNDER FRONT PASSENGER SEAT tool kit rubber band gear change tool Servicing Your Honda...
Page 139: Owner's Manual Storage
Store your owner’s manual in the owner’s manual storage on the inside of the document compartment. The owner’s manual should be stored in the plastic bag. Be careful not to flood this area when washing your Honda SXS. RIGHT SIDE document compartment owner’s manual storage owner’s manual...
Page 140: Front Hood
While driving, if the prongs of the front hood pop up from the grommets, stop the vehicle at a safe place and insert the prongs into the grommets securely. tabs to unlock front hood to lock prongs knobs slots hooks grommets Servicing Your Honda...
Page 141: Seat Removal
Make sure that the seat is locked securely in position by pulling it up lightly. Since the bottom shapes of the driver/left rear passenger seats and front/right rear passenger seats are different, install them in their correct position. Servicing Your Honda...
Page 142: Air Cleaner Outer Cover Removal
1. Insert the hooks into the slots. 2. Insert the prong into the grommet. 3. Turn the knobs 1/4 counterclockwise or 1/4 clockwise to the lock position. IN FRONT OF CARGO BED unlock unlock knobs prong air cleaner hooks outer cover grommet slots Servicing Your Honda...
Page 143: Clip Removal
1. Pull up the center pin to release the lock. 2. Pull out the clip of the hole. Installation 1. Insert the clip into the hole. 2. Press down the center pin securely to lock the clip. Servicing Your Honda...
Page 144: Jack-Up Point & Support Point
• Place a jack only at the specified jack-up point. • Do not leave any person or cargo in the vehicle. • Do not place any object above or under a jack. FRONT REAR support points support points jack up point jack up point Servicing Your Honda...
Page 145: Fuel
86 (or higher) Use only unleaded fuel in your Honda. The use of leaded fuel will damage the catalytic converter. If you drive your Honda in a country where leaded fuel might be available, take precautions to use only unleaded fuel.
Page 146 Refueling Procedure Refer to Safety Precautions on page 117. RIGHT SIDE fuel fill cap lower edge of filler neck 1. Open the right rear door (page 51). 2. Turn the fuel fill cap counterclockwise. (cont’d) Servicing Your Honda...
Page 147 • Wipe up spills immediately. 4. After refueling, turn the fuel fill cap clockwise until it clicks and close the right rear door. If you replace the fuel fill cap, use a Honda Genuine replacement part or equivalent. NOTICE Gasoline can damage painted and matte painted surfaces.
Page 148: Engine Oil & Filters
Change the engine oil as specified in the maintenance schedule on page 121. When running in very dusty conditions, oil changes should be performed more frequently than specified in the maintenance schedule. Servicing Your Honda...
Page 149 * Suggested oils are equal in performance to SJ oils that are not labeled as energy conserving or resource conserving on the circular API service label. • Your Honda SXS does not need oil additives. Use the recommended oil. • Do not use oils with graphite or molybdenum additives. They may adversely affect clutch operation.
Page 150 The JASO T 903 standard is an index for engine oils for 4-stroke motorcycle engines. There are two classes: MA and MB. Oil conforming to the standard is labeled on the oil container. For example, the following label shows the MA classification. oil code classification Servicing Your Honda...
Page 151 Check the engine oil level each day before operating your Honda SXS and add, if needed. 1. Park your Honda SXS on a firm, level surface. Shift the shift select lever into the park (P) position. 2. Start the engine in a well-ventilated area and let it idle for 3 – 5 minutes.
Page 152 6. Reinstall the oil fill cap and dipstick, and then install the air cleaner outer cover. NOTICE Running the engine with an improper oil level can cause serious engine damage. IN FRONT OF CARGO BED LEFT SIDE oil fill cap Servicing Your Honda...
Page 153 (page 223). If you do not have the skills or the tools, see your dealer. Your Honda SXS is equipped with two oil filters: an engine oil filter and a DCT (Dual Clutch Transmission) oil filter.
Page 154 Engine Oil & Filters Drain the Engine Oil: 1. Make sure the Honda SXS is parked on a firm, level surface. Shift the shift select lever into the park (P) position. – It may be necessary to jack up and support your Honda SXS to change the oil and filter, see page 135.
Page 155 (oil pan) (oil tank) sealing washer NOTICE Be sure not to drain sub-transmission oil unless intending to do so. The engine and sub-transmission oils are not connected. Servicing Your Honda...
Page 156 7. Apply engine oil to a new O-ring and install it to the engine oil filter cover. Install a new oil filter. Use only the Honda Genuine oil filter or a filter of equivalent quality specified for your model. Using the wrong Honda filter,...
Page 157 10. When changing the DCT oil filter, proceed to step 11 in Install a New DCT Oil Filter on the next page. If you are not changing the DCT oil filter, proceed to step 15 in Add Engine Oil: on page 151. Servicing Your Honda...
Page 158 12. Apply engine oil to a new O-ring and install it to the DCT oil filter cover. Install a new oil filter. Use only the Honda Genuine oil filter or a filter of equivalent quality specified for your model. Using the wrong Honda filter,...
Page 159 Engine Oil & Filters 14. Pour the drained oil into a suitable container and dispose of it in an approved manner (page 223). NOTICE Improper disposal of drained fluids is harmful to the environment. Servicing Your Honda...
Page 160 If a torque wrench is not used for installation, see your dealer as soon as possible to verify proper assembly. UNDER BODY FORWARD BACKWARD sealing washer engine oil engine oil drain bolt (oil pan) drain bolt (oil tank) sealing washer Servicing Your Honda...
Page 161: Sub-Transmission Oil
(page 121) and add, if needed. Before driving your SXS, check the sub-transmission oil level. 1. Park your Honda SXS on a firm, level surface. Shift the shift select lever into the park (P) position. 2. Remove the oil fill cap/dipstick from the transmission cover and wipe it clean.
Page 162 Do not over fill. 5. Reinstall the oil fill cap/dipstick. NOTICE Running the engine with an improper oil level can cause serious engine damage. Servicing Your Honda...
Page 163 (page 223). If you do not have the skills or the tools, see your dealer. 1. Make sure the Honda SXS is parked on a firm, level surface. Shift the shift select lever into the park (P) position.
Page 164 9. Check that there are no oil leaks. If a torque wrench is not used for installation, see your dealer as soon as possible to verify proper assembly. NOTICE Improper disposal of drained fluids is harmful to the environment. Servicing Your Honda...
Page 165: Front Final Gear Oil
Honda shaft drive oil or equivalent Checking Oil Refer to Safety Precautions on page 117. 1. Park your Honda SXS on a firm, level surface. Shift the shift select lever into the park (P) position. 2. Remove the oil fill cap and O-ring.
Page 166 Change the oil with the front final gear at normal operating temperature to assure complete and rapid draining. 1. Park the Honda SXS on a firm, level surface. Shift the shift select lever into the park (P) position. 2. Place an oil drain pan under the oil drain plug.
Page 167: Rear Final Gear Oil
Honda shaft drive oil or equivalent Checking Oil Refer to Safety Precautions on page 117. 1. Park your Honda SXS on a firm, level surface. Shift the shift select lever into the park (P) position. 2. Remove the oil check bolt and sealing washer.
Page 168 Change the oil with the rear final gear at normal operating temperature to assure complete and rapid draining. 1. Park the Honda SXS on a firm, level surface. Shift the shift select lever into the park (P) position. 2. Place an oil drain pan under the oil drain plug.
Page 169 (page 223). NOTICE Improper disposal of drained fluids is harmful to the environment. RIGHT REAR sealing washer oil fill cap/O-ring sealing washer lower edge of oil check inspection oil drain hole plug oil check bolt Servicing Your Honda...
Page 170: Coolant
Using tap water may cause engine damage. The factory provides a 50/50 solution of antifreeze and distilled water in this Honda SXS. This coolant solution is recommended for most operating temperatures and provides good corrosion protection.
Page 171 Refer to Safety Precautions on page 117. Check the engine coolant level every day before operating your Honda SXS and add, if needed. 1. Make sure the vehicle is parked on a firm, level surface. 2. With the engine at normal operating temperature, check the coolant level in the reserve tank.
Page 172 RIGHT FRONT reserve tank cap 5. Add coolant to the reserve tank as required to bring the coolant level to the MAX level mark. 6. After adding coolant, install the reserve tank cap and install the front hood. Servicing Your Honda...
Page 173 Refer to Safety Precautions on page 117. Coolant should be replaced by your dealer, unless you have the proper tools and service data, and are mechanically qualified. Refer to the official Honda Service Manual. WARNING WARNING Removing the radiator cap while the engine is hot can cause the coolant to spray out, seriously scalding you.
Page 174 Have the radiator checked by your dealer if more than 20% of the radiator surface air flow is restricted. Clean the radiator core after driving your Honda SXS in mud. To clean the radiator core: 1. Remove the front hood (page 131).
Page 175: Air Cleaner
Your dealer can help you determine the correct service interval for your driving conditions. Your Honda SXS’s air cleaner has very specific performance requirements. Use a new Honda Genuine air cleaner specified for your model or an air cleaner of equal quality. NOTICE Using the wrong air cleaner may result in premature engine wear.
Page 176 4. Pull the air cleaner out to the right side by loosening the screws A and removing the screws B and collars. When removing the air cleaner, be careful not to allow foreign objects to drop into the air intake ducts and air cleaner housing. (cont’d) Servicing Your Honda...
Page 177 3.7 lbf·ft (5 N·m, 0.5 kgf·m) 9. Install a new cover seal into the seal groove of the air cleaner housing cover. 10. Install the air cleaner housing cover and latch the retainer clips. 11. Install the air cleaner outer cover. Servicing Your Honda...
Page 178 Air Cleaner Air Cleaner Housing Drain Tubes Your Honda SXS has two air cleaner housing drain tubes (clean side and dirty side). The air cleaner housing drain tubes should be serviced every 600 miles (1,000 km) or 100 hours of operating your Honda SXS. (Driving through water may require more frequent inspection.)
Page 179 5. Reinstall the air cleaner housing drain tube plug, securing it with the clip. 6. Secure the air cleaner housing drain tube with the clamp. UNDER LEFT REAR FENDER clamp clip air cleaner housing air cleaner housing drain tube plug drain tube Servicing Your Honda...
Page 180: Lubrication
(page 122). Consult your dealer for more information about lubrication procedures. Apply grease to each pivot to prevent corrosion. Check for smooth movement after lubrication. If the movement is not smooth after applying grease, see your dealer. Servicing Your Honda...
Page 181 Remove the clips (page 134) and the lower cover. steering wheel tilt pivots clips lower cover clips Lubricate the brake pedal pivot and accelerator pedal pivot as shown in the following illustration. accelerator pedal pivot brake pedal pivot Servicing Your Honda...
Page 182 Lubricate the shift select lever pivots as shown in the following illustration. CENTER CONSOLE shift select lever pivots Lubricate each door latch as shown in the following illustration. Open the doors (page 51). LEFT SIDE (right side similar) rear door latch front door latch Servicing Your Honda...
Page 183: Accelerator Pedal
Accelerator Pedal Inspection Refer to Safety Precautions on page 117. Your Honda SXS is equipped with an accelerator pedal position sensor. When the openings of the accelerator pedal and throttle valve do not match, the PGM-FI Malfunction Indicator Lamp (MIL) comes on and limits the vehicle to a safe controllable speed.
Page 184 5. Tighten the lock nut and reinstall the sleeve. 6. After adjustment, check for smooth operation of the accelerator pedal. 7. Install the front hood. UNDER FRONT HOOD LEFT FRONT sleeve decrease freeplay throttle cable adjuster lock nut increase freeplay Servicing Your Honda...
Page 185: Spark Plugs
To prevent damaging the iridium coating of the center electrode, never use a “leaf-type feeler gauge.” • Do not adjust the spark plug gap. If the gap is out of specification, replace the spark plug with a new one. Servicing Your Honda...
Page 186 If the gauge fits in the gap, replace the plug with a new one. UNDER RIGHT REAR FENDER spark plug wrench spark plug gap 10 x 14 mm Open end wrench spark plug caps (cont’d) Servicing Your Honda...
Page 187 An improperly tightened spark plug can damage the engine. If a plug is too loose, the piston may be damaged. If a plug is too tight, the threads may be damaged. 8. Connect the spark plug caps. Take care to avoid pinching any cables or wires. Servicing Your Honda...
Page 188: Spark Arrester
Because of the possible fire hazard, check that there are no combustible materials in the area before purging the spark arrester. 1. Select a well-ventilated area free of combustible materials and make sure the exhaust pipe is cool. 2. Remove the bolt. REAR bolt (cont’d) Servicing Your Honda...
Page 189 3. Start the engine and rev it up approximately twenty times while momentarily creating exhaust system back pressure by blocking the end of the muffler with a shop towel. 4. Stop the engine and allow the exhaust pipe to cool. 5. Reinstall the bolt securely. Servicing Your Honda...
Page 190: Exhaust System
Exhaust System Exhaust System Inspection Stop the engine and check for any sign of exhaust gas leakage. Listen for exhaust leaks near the muffler, which is located by the left rear wheel well. check for exhaust leakage Servicing Your Honda...
Page 191: Suspension
Do not attempt to disassemble, service, or dispose of the damper. See your dealer. The way you drive your Honda SXS and the type of ride you want to experience can also influence your suspension needs.
Page 192 The system is always active while moving and will continually adjust compression damping levels according to the situation and behavior of the vehicle such as accelerating, decelerating, braking or cornering. (cont’d) Servicing Your Honda...
Page 193 You can check the current mode with the indicators. FLV warning indicator FLV NORMAL mode indicator FLV SPORT mode indicator If the FLV warning indicator comes on while driving, reduce speed and take your vehicle to a dealer as soon as possible. Servicing Your Honda...
Page 194 Position 1: use in low payload conditions at low speeds. Position 2: standard position. Position 3: use in high payload conditions such as driving with 4 riders, and/or at higher speeds. Make sure that both shock absorbers are adjusted to the same position. Servicing Your Honda...
Page 195 Position 1: use in low payload conditions at low speeds. Position 2: standard position. Position 3: use in high payload conditions such as driving with 4 riders, driving with cargo, and/or at higher speeds. Make sure that both shock absorbers are adjusted to the same position. Servicing Your Honda...
Page 196 Suspension Suspension Components Inspection Refer to Safety Precautions on page 117. 1. Jack up and support your Honda SXS (page 135). 2. Visually inspect the front and rear suspension arms, bushings, ball joints and shock mount bearings for any damage.
Page 197: Brakes
Honda DOT 4 Brake Fluid The recommended brake fluid is Honda DOT 4 Brake Fluid, or any brake fluid of equal quality and performance. Use fresh brake fluid from a sealed container. Be sure to read the label before opening the sealed container.
Page 198 It should be between the MIN and MAX level marks. If the level is at or below the MIN level mark, check the brake pads for wear (page 191). (cont’d) Servicing Your Honda...
Page 199 Other Inspections • Make sure there are no fluid leaks. • Check for deterioration or cracks in the hoses and fittings. If the hoses are worn or cracked, have them replaced by your dealer. Servicing Your Honda...
Page 200 Note that the pads are designed to make a metallic noise during braking when they reach the wear limit. If you hear a continuous metallic friction sound when applying the brakes, the brake pads need to be replaced. Have the vehicle checked by a dealer. Servicing Your Honda...
Page 201 Brake Pedal Inspection Refer to Safety Precautions on page 117. Check that the brake pedal moves smoothly and does not feel abnormally spongy according to the maintenance schedule (page 122). CHECK THAT THE BRAKE PEDAL MOVES SMOOTHLY. brake pedal Servicing Your Honda...
Page 202 Adjustment is done by holding the switch body and turning the adjusting nut. Turn the nut in direction (A) if the switch operates too late, and in direction (B) if the switch operates too soon. UNDER LEFT FRONT FENDER brake light switch Servicing Your Honda...
Page 203: Tires
Tires To safely operate your Honda SXS, your tires must be the proper type and size, in good condition with adequate tread, and correctly inflated. WARNING WARNING Using tires that are excessively worn, improperly inflated, damaged, or overloaded can cause a crash in which you can be seriously hurt or killed.
Page 204 Generally, underinflated tires wear unevenly, adversely affect handling, and are more likely to fail from being overheated. Overinflated tires make your Honda SXS drive harshly, are more prone to damage from surface hazards, and wear unevenly.
Page 205 Always check air pressure when your tires are “cold.” If you check air pressure when your tires are “warm” — even if your Honda SXS has only been driven for a few miles — the readings will be higher. If you let air out of warm tires to match the recommended cold tire pressures, the tires will be underinflated.
Page 206 WARNING WARNING Operating this Honda SXS with improper tires, uneven tire pressure, damaged tires, or overloading the tires may cause loss of control, and you could be seriously injured or killed.
Page 207 For best performance, you should replace a tire before the tread depth at the center reaches the following limits: front 3/16 in (4 mm) rear 3/16 in (4 mm) Servicing Your Honda...
Page 208 If you choose to have a tire repaired, be sure the repair work is performed by a professional. If you have a tire professionally repaired at a non-Honda facility, we recommend that you have the work checked by your Honda dealer.
Page 209 Tires Tire Replacement Refer to Safety Precautions on page 117. The tires that came on your Honda SXS were designed to match the performance capabilities of the vehicle and provide the best combination of handling, braking, and comfort. It is best to replace all four tires. However, if that is not possible, you must replace the tires in pairs (front or rear) with tires of the same size and type as the originals.
Page 210 When you replace a tire, remember: Have the tire replaced by your Honda dealer, if possible. If you have a tire professionally replaced at a non-Honda facility, we recommend that you have the work checked by your Honda dealer. Servicing Your Honda...
Page 211: Wheels
Wheels Inspection Check that the wheel nuts are tight and there are no cracks or deformation in the wheel. CHECK FOR CRACKS OR DEFORMATION. CHECK THAT THE WHEEL NUTS ARE TIGHT. Servicing Your Honda...
Page 212: Driveshaft Boots
Check the rubber boots for tears or traces of splattered grease. If necessary, have your dealer replace them. FRONT steering rack boots front arm ball front arm ball driveshaft boots joint boots joint boots REAR driveshaft boots Servicing Your Honda...
Page 213: Battery
Honda SXS, or do not drive frequently, we recommend that you charge the battery frequently (see Battery Charging, page 208). If you do not expect to drive your Honda SXS for at least two weeks, we recommend you remove the battery, or at least disconnect the battery cables (negative cable first).
Page 214 Battery Battery Storage Refer to Safety Precautions on page 117. If you plan to store your Honda SXS, we recommend you remove the battery and store it where it can be charged every 30 days to maintain its service life.
Page 215 The battery is located under the left rear fender. Removal 1. Make sure the ignition switch is OFF (w). 2. Unlatch the retainer clips and remove the battery cover. UNDER LEFT REAR FENDER retainer clips battery cover Servicing Your Honda...
Page 216 Reinstall in the reverse order of removal. Be sure to connect the positive (+) terminal first, then the negative (-) terminal. Make sure the clock is set to the proper time after the battery is reconnected (page 34). Servicing Your Honda...
Page 217 We recommend using a charger designed specifically for your Honda, which can be purchased from your dealer. These units can be left connected for long periods without risking damage to the battery. However, do not intentionally leave the charger connected longer than the time period recommended in the charger’s...
Page 218: Appearance Care
Frequent cleaning and polishing will keep your Honda looking newer longer. Frequent cleaning also identifies you as an owner who values their Honda SXS. A clean Honda SXS is also easier to inspect and service. General Recommendations Refer to Safety Precautions on page 117.
Page 219 3. Wash your Honda SXS with a sponge or soft towel. As you wash, check for heavy grime. If necessary, use a mild cleaner/degreaser to remove the grime.
Page 220 Appearance Care 7. As a precaution, drive your Honda SXS at a slow speed and apply the brakes several times. This will help dry the brakes and restore normal braking performance. The headlights' inside lens may fog temporarily after washing or while driving in the rain.
Page 221 Appearance Care Spray Cleaning Your Honda SXS Refer to Safety Precautions on page 117. Avoid using spray cleaner products on the tires or suspension components. Suggestions for using spray cleaners: Honda SXS condition Recommended Cleaning Dust and fingerprint Apply a spray cleaner/polish smudges.
Page 222 Dry with chamois or a soft towel. If necessary, remove heat stains by using a commercially available fine texture compound. Then, rinse by the same manner as removing mud or dust. Servicing Your Honda...
Page 223 (USA only) If a surface on your Honda SXS is chipped or scratched, your dealer has touch-up paint to match your Honda SXS’s color. Be sure to use your Honda SXS’s color code (page 257) when you buy touch-up paint.
Page 224: Tips
Tips Here’s some helpful advice on how to prepare for an off-road Tips adventure, how to transport and store your Honda, and how to be an environmentally responsible Honda SXS owner. Preparing for a Drive..............216 What to Take to the Operating Area........216 What to Take on the Trail ............
Page 225: Preparing For A Drive
What to Take to the Operating Area Along with your Honda SXS and personal safety gear, you should take along some tools and supplies in case you have a problem. For some of the difficulties you might encounter, see Taking Care of the Unexpected, which begins on page 225.
Page 226: What To Take On The Trail
Preparing for a Drive What to Take on the Trail What you take with you during a ride depends on the kind of terrain, how long you expect to drive, how far you might go from help, and how experienced you or your companions are in making repairs. If you decide to take some tools, spare parts, or other supplies on the trail, be sure you can carry them safely and know how to use them.
Page 227: Transporting Your Honda
Transporting Your Honda Do not tow your Honda SXS behind a car or other vehicle. Follow these procedures: 1. Shift the shift select lever into the park (P) position. 2. Secure the vehicle with tie-down straps in the areas shown.
Page 228: Storing Your Honda
Storing Your Honda If you won’t be driving for an extended period, such as during the winter, thoroughly inspect your Honda SXS and correct any problem before storing it. That way, needed repairs won’t be forgotten and it will be easier to get your Honda SXS running again.
Page 229: Preparation For Storage
2. Make sure the cooling system is filled with a 50/50% antifreeze solution (page 161). 3. Add Pro Honda Fuel Stabilizer or equivalent to the fuel tank before filling it with fuel. Fill the fuel tank. Make sure the fuel fill cap is properly installed.
Page 230 9. Place your Honda SXS on blocks to lift all tires off the floor. 10. Cover your Honda SXS with a porous material. Avoid using plastic or similar non-breathing, coated materials that restrict air flow and allow heat and moisture to accumulate.
Page 231: Removal From Storage
Refer to Safety Precautions on page 117. 1. Uncover and clean your Honda SXS. 2. If your Honda SXS has been stored for more than four months — change the engine oil (page 144). 3. If your Honda SXS has been stored for more than two months —...
Page 232: You & The Environment
You & the Environment Owning and operating a Honda SXS can be enjoyable, but you must do your part to protect nature. When you show respect for the land, wildlife, and other people, you also help preserve off-road driving. Following are tips on how you can be an environmentally responsible Honda SXS owner.
Page 233 This page intentionally left blank. Tips...
Page 234: Taking Care Of The Unexpected
Taking Care of the Unexpected With all the challenges you can encounter off-road, there’s a chance Taking Care of the Unexpected that sometime something may go wrong. This section gives practical advice to help you deal with a wide range of problems. Take time to read this section before you drive.
Page 235: General Guidelines
Remember to take along your owner’s manual, the tool kit that came with your Honda SXS, and any other items (such as tire repair supplies and additional tools) that might help you solve a problem on your own.
Page 236 • Do not continue driving if you are hurt or your Honda SXS is not in safe driving condition. Additional recommendations for specific problems follow.
Page 237: If Your Engine Quits Or Won't Start
If Your Engine Quits or Won’t Start Proper operation and maintenance can prevent starting and engine performance problems. In many cases, the cause of the problem may be a simple operational oversight. If you have a problem starting the engine — or experience poor engine performance —...
Page 238 If Your Engine Quits or Won’t Start SYMPTOM: Starter motor doesn’t operate. POSSIBLE CAUSE WHAT TO DO transmission not in Shift into park (P) or neutral park (P) or neutral (N) (N) position or press on the position brake pedal. blown fuse Replace with a new fuse of the same rating (page 241).
Page 239 If Your Engine Quits or Won’t Start SYMPTOM: Engine starts, but runs poorly. POSSIBLE CAUSE WHAT TO DO high coolant Check the high coolant temperature temperature indicator. Refer to If the High Coolant Temperature Indicator Lights, page 238. runs erratically, misfires May damage catalytic converter.
Page 240: If The Transmission Is Not Functioning Properly
Functioning Properly If the gear position indicator is blinking, perform the following: 1. If you are driving your Honda SXS, stop at a safe place. 2. Shift the shift select lever to the park (P) position. 3. Check the pattern displayed on the gear position indicator, and then perform the following.
Page 241 If the Transmission Is Not Functioning Properly If “-” continues to blink: Change the gear position by using the gear change tool, and tighten the emergency valve. Perform the following procedure. 1. Turn the ignition switch to the OFF (w) position to stop the engine.
Page 242 If the Transmission Is Not Functioning Properly 6. Return the gear change tool to the storage compartment. 7. Check that “E” is blinking. Next, tighten the emergency valve. Proceed to “E” is blinking. If “–” is not displayed in the gear position indicator and you change the gear position by using the gear change tool, the DCT system will automatically stop.
Page 243 If the Transmission Is Not Functioning Properly 4. Turn the ignition switch to the START ( ll ) position to start the engine. 5. Check that the gear position (“1”, “2”, “3”, “4”, “5” or “6”) is blinking. 6. At high-range (H) or low-range (L), you can drive only in the gear position that is blinking.
Page 244: If You Have A Flat Tire
We strongly recommend that you do not try to drive with a flat tire. The Honda SXS will be hard to handle, and if the tire comes off the rim, it may lock up the wheel and cause you to crash or overturn.
Page 245 Removal 1. Park your Honda SXS on a firm, level surface. 2. Loosen — but do not remove — the wheel nuts. 3. Raise the front (or rear) wheels off the ground (page 135). 4. Remove the wheel nuts.
Page 246 3. Position the wheel nuts so that the tapered sides face the wheel rim. 4. Hand-tighten the wheel nuts on the wheel, then lower the Honda SXS to the ground before tightening the nuts in a crisscross (rather than circular) pattern to the specified torque: 80 lbf·ft (108 N·m, 11 kgf·m) If a torque wrench was not used for installation, see your dealer as soon as possible to verify proper assembly.
Page 247: If The High Coolant Temperature Indicator Lights
If the High Coolant Temperature Indicator Lights Normally, the high coolant temperature indicator will only light momentarily when you turn the ignition ON (q). Occasionally, it may flicker at or near idling speed. High coolant temperature may be caused by restriction of air flow to the radiator (such as mud caked on the radiator), extended idling, an oil leak, a coolant leak, a low oil level, a low coolant level, or extended operation under adverse conditions.
Page 248 • Check for an oil leak. • Check the oil level. If necessary, add the recommended oil (page 140) to the upper level mark. If you must leave your Honda SXS to get oil, secure it as much as possible.
Page 249: If The Clutch Temperature Indicator Flashes
If the Clutch Temperature Indicator Flashes The clutch temperature indicator flashes if the clutch temperature becomes unusually high. If the indicator flashes, release the accelerator pedal as soon as it is safe to and apply the brakes. Shift the transmission to neutral (N) or park (P) and allow the engine to idle until the indicator stops flashing.
Page 250: If A Fuse Blows
If a Fuse Blows All of the electrical circuits on your Honda SXS have fuses to protect them from damage caused by excess current flow (short circuit or overload). If something electrical on your Honda SXS stops working, the first thing you should check for is a blown fuse.
Page 251 If a Fuse Blows Recommended Fuses main fuse 50 A circuit fuses SXS1000S4X 30 A × 2, 15 A × 2, 10 A × 7 SXS1000S4XD 30 A × 2, 15 A × 1, 10 A × 8 electric power steering 40 A (EPS) fuse brake traction control...
Page 252 If a Fuse Blows Main & Circuit Fuses 1. To prevent an accidental short circuit, turn the ignition switch OFF (w) before checking or replacing fuses. 2. Pull the top of fuse box lid out to release its prong from the grommet.
Page 253 If a Fuse Blows BETWEEN REAR PASSENGER SEATS grommet prong slit tabs fuse box lid Taking Care of the Unexpected...
Page 254 If a Fuse Blows Main Fuse Access 3. Remove the fuse box cover. 4. To access the main fuse, remove the bolts, and then pull the main fuse out. If the main fuse is blown, see your dealer for this service. fuse box cover main fuse bolts...
Page 255 If a Fuse Blows Circuit Fuse Access 5. To check or replace a circuit fuse, pull the fuses out one by one with the fuse puller located behind the fuse box cover. If the fuse is blown, replace it with a spare fuse of the same rating. If you do not have a replacement fuse with the proper rating for the circuit, install one with a lower rating.
Page 256 If a Fuse Blows Other Fuses 1. Turn the ignition switch to OFF (w) before checking the fuse. 2. Remove the battery cover (page 206). Electric Power Steering (EPS) Fuse Access 3. To access the EPS fuse, remove the fuse cover. If the EPS fuse is blown, see your dealer for this service.
Page 257 If a Fuse Blows If you do not have a spare fuse and you cannot drive the Honda SXS without fixing the problem, take a fuse of the same rating or a lower rating from one of the other circuits that you can do without temporarily.
Page 258: If You Crash
If there is minor damage, or you are unsure about possible damage but decide to try driving the Honda SXS back to your base, drive slowly and cautiously. Sometimes, crash damage is hidden or not immediately apparent.
Page 259: If You Lose Your Key
If you don’t know your key number, call the dealer where you purchased your Honda SXS. They may have it listed in their records. If they don’t, transport your Honda SXS to them or the nearest dealer. The dealer will probably have to remove the ignition switch assembly to find the key number so they can make a key for you.
Page 260: If The Battery Is Low
If the battery is low, the starter motor doesn’t operate or works poorly, and you can’t start the engine. Jump starting your Honda SXS should be avoided. Instead, the battery should be removed and recharged (page 208). If you can’t charge the battery or it appears unable to hold a charge, contact your dealer.
Page 261 If the Battery Is Low 1. To prevent an accidental short circuit, turn the ignition switch OFF (w). 2. Remove the battery cover (page 206). 3. Using a fully charged 12-volt battery, connect the positive (+) side of the jumper cable to the charged battery, and connect the positive (+) side on the other end of the jumper cable to the positive (+) terminal of vehicle battery.
Page 262: If A Component Fails
• If you damage the accelerator cable or other critical component, your Honda SXS may be unsafe to drive. Carefully assess the damage and make any repairs that you can. But if there is any doubt, it’s best to be conservative and safe.
Page 263: If The Vehicle Speed Does Not Exceed 15 Mph (24 Km/H)
If the Vehicle Speed Does Not Exceed 15 mph (24 km/h) If the driver's side seat belt is not latched properly, the maximum vehicle speed will be limited to no more than 15 mph (24 km/h) by the seat belt speed limiting system (page 60). Also, the seat belt indicator and speedometer digits blink.
Page 264: Technical Information
Technical Information This section contains dimensions, capacities, and other technical Technical Information data, plus information on government requirements and how to break-in your Honda SXS. Vehicle Identification ..............256 Specifications ................258 Break-in Guidelines..............265 Emission Control Systems (USA only) ........266 Oxygenated Fuels (USA only) ............
Page 265: Vehicle Identification
Vehicle Identification Serial Numbers The VIN and engine serial number may be required when ordering replacement parts. You may record these numbers in the Quick Reference section at the rear of this manual. The VIN is stamped on the left side of the frame, located under the left front fender.
Page 266 Vehicle Identification Color Label & Code The color label is attached to the right side of the frame, located under the front hood (page 131). The color code is helpful when ordering replacement parts. You may record the color and code in the Quick Reference section at the rear of this manual.
Page 267: Specifications
Specifications Dimensions overall length SXS1000S4X 152.5 in (3,873 mm) SXS1000S4XD 152.5 in (3,874 mm) overall width 64.0 in (1,625 mm) overall height SXS1000S4X 78.5 in (1,995 mm) SXS1000S4XD 78.1 in (1,984 mm) wheelbase 116.4 in (2,956 mm) ground SXS1000S4X clearance 12.8 in (324 mm) SXS1000S4XD 12.6 in (320 mm)
Page 268 API service label, SAE 10W-30, JASO T 903 standard MA, Pro Honda GN4 4-stroke oil or Honda 4-stroke oil, or an equivalent cooling system Pro Honda HP Coolant or an recommendation...
Page 269 Specifications Capacities passenger driver and three passengers capacity maximum weight 1,164 lb (528 kg) capacity driver, passengers, all cargo and accessories Engine Specifications displacement 60.9 cu-in (999 cm bore & stroke 3.6220 x 2.9586 in (92 x 75.148 mm) compression ratio 10.0 : 1 spark plug SILMAR8A9S (NGK)
Page 270 Specifications Power Transmission primary reduction 1.883 final reduction front 3.384 rear 3.307 transmission ratio 2.764 2.047 1.583 1.230 0.968 0.800 sub-transmission 2.666 ratio high 1.880 reverse 2.640 final drive shaft Chassis & Suspension caster 4° trail SXS1000S4X 0.9 in (24 mm) SXS1000S4XD 1.0 in (25 mm) tire size...
Page 271 Specifications Lights headlight SXS1000S4X 12 V 60/55 W x 2 SXS1000S4XD brake light/ taillight neutral indicator reverse indicator high coolant temperature indicator PGM-FI malfunction indicator lamp (MIL) electric power steering (EPS) indicator seat belt indicator I - 4WD indicator low oil pressure indicator hill start assist (HSA) indicator...
Page 272 Specifications Lights FLV NORMAL indicator (SXS1000S4XD) LAUNCH MODE indicator If there is a LED which is not turned on, see your dealer for this service. Fuses main 50 A circuit SXS1000S4X 30 A × 2, 15 A × 2, 10 A × 7 SXS1000S4XD 30 A ×...
Page 273 Specifications Torque Specification passenger handhold 13 lbf·ft (17 N·m, 1.7 kgf·m) adjusting nut passenger handhold 20 lbf·ft (26.5 N·m, 2.7 kgf·m) lock nut engine oil filter 9 lbf·ft (12 N·m, 1.2 kgf·m) cover bolts DCT oil filter 9 lbf·ft (12 N·m, 1.2 kgf·m) cover bolts engine oil drain 21 lbf·ft (29 N·m, 3.0 kgf·m)
Page 274: Break-In Guidelines
Break-in Guidelines Help assure your Honda SXS’s future reliability and performance by paying extra attention to how you drive during the first operating day or 15 miles (25 km). During this period, avoid full-throttle starts and rapid acceleration. Technical Information...
Page 275: Emission Control Systems (Usa Only)
Emission Control Systems (USA only) Exhaust Emission Requirements The U.S. Environmental Protection Agency (EPA) and the California Air Resources Board (CARB) require that your SXS comply with applicable exhaust emissions standards during its useful life, when operated and maintained according to the instructions provided. The Vehicle Emission Control Information Label is attached on the left side of the frame under the left rear fender.
Page 276 Carbon monoxide does not react in the same way, but it is toxic. Honda Motor Co., Ltd. utilizes various systems to reduce carbon monoxide, oxides of nitrogen and hydrocarbons. Exhaust Emission Control System The exhaust emission control system includes an oxygen sensor, a three-way catalytic converter and a PGM-FI system.
Page 277 If you loan, sell, or give your competition modified Honda to someone else, according to applicable law, you must inform the new owner/driver in writing that the vehicle is to be used for competition only.
Page 278 Emission Control Systems (USA only) Noise Emission Control System TAMPERING WITH THE NOISE CONTROL SYSTEM IS PROHIBITED: State laws prohibit, the following acts or the causing thereof: (1) The removal or rendering inoperative by any person, other than for purposes of maintenance, repair or replacement, of any device or element of design incorporated into any new vehicle for the purpose of noise control prior to its sale or delivery to the ultimate purchaser or while it is in use;...
Page 279: Oxygenated Fuels (Usa Only)
Oxygenated Fuels (USA only) Some conventional gasolines are being blended with alcohol or an ether compound. These gasolines are collectively referred to as oxygenated fuels. To meet clean air standards, some areas of the United States use oxygenated fuels to help reduce emissions. If you use an oxygenated fuel, be sure it is unleaded and meets the minimum octane rating requirement.
Page 280 Oxygenated Fuels (USA only) Do not use gasoline containing METHANOL (methyl alcohol). If you notice any undesirable operating symptoms, try another service station or switch to another brand of gasoline. Fuel system damage or performance problems resulting from the use of an oxygenated fuel containing more than the percentages of oxygenates mentioned above are not covered under warranty.
Page 281: Petrol Containing Alcohol (Australia & New Zealand Only)
Do not use gasohol that contains more than 10% ethanol. Engine performance problems resulting from the use of fuels that contain alcohol are not covered under the warranty. Honda cannot endorse the use of fuels containing methanol since evidence of their suitability is not yet complete.
Page 282: Catalytic Converter
The catalytic converter acts on HC, CO, and NOx. A replacement unit must be an original Honda part or its equivalent. The catalytic converter must operate at a high temperature for the chemical reactions to take place. It can set fire to any combustible materials that come near it.
Page 283 This page intentionally left blank. Technical Information...
Page 284: Consumer Information (Usa Only)
Honda service manual. Authorized Manuals (USA only) ..........276 Warranty Coverage (USA only) ..........277 Warranty Service (USA only) ............. 278 Contacting Honda (USA only) ........... 279 Your Honda Dealer (USA only) ..........280 Consumer Information (USA only)
Page 285: Authorized Manuals (Usa Only)
The Service Manual used by your authorized dealer is available from your Honda dealer or Helm, Inc. Also available but not necessary to service your model is the Honda Common Service Manual which explains theory of operation and basic service information for various systems on Honda motorcycles, scooters, ATVs, SXSs and PWCs.
Page 286: Warranty Coverage (Usa Only)
There are responsibilities, restrictions, and exclusions which apply to these warranties. Please read the Warranties Booklet given to you by your Honda dealer at the time of purchase. Be sure to keep your Honda owner’s card with your Warranties Booklet.
Page 287: Warranty Service (Usa Only)
(such as brakes, tires, etc.). If you believe you have a problem with your Honda SXS, call the service department of your dealer. Make an appointment for an inspection and diagnosis. Remember, as the owner of the Honda SXS, you will be asked to authorize that inspection.
Page 288: Contacting Honda (Usa Only)
Contacting Honda (USA only) Your owner’s manual was written to cover most of the questions you might ask about your Honda. Any questions not answered in the owner’s manual can be answered by your dealer. If your dealer doesn’t have the answer right away, they will get it for you.
Page 289: Your Honda Dealer (Usa Only)
Your Honda Dealer (USA only) Once you purchase your new Honda, get familiar with the organization of your Honda dealer so you can utilize the full range of services available. The service department is there to perform regular maintenance and unexpected repairs.
Page 290: Index
............2 air cleaner outer cover removal ..........133 air cleaner, filter ..................166 housing drain tubes ...............169 air pressure, tire ................195 American Honda, contacting ............279 apparel, protective ..............77 appearance care ...............209 AT indicator ................36 AT/MT switch ................43 authorized manuals ..............276 battery ..................204...
Page 291 Index climbing hills ................108 clip removal ................134 clutch temperature indicator ............20 color label ................257 compartment, owner’s manual ..............130 storage ..................67 tool kit ..................129 component fails ................253 consumer information ..............275 coolant temperature gauge ............30 crash, if you ................249 crossing a hill ................110 customer service ...............279 dipstick ................142, 152 doors ..................51...
Page 292 Index electric power steering (EPS) indicator .........19 electronic brakeforce distribution (EBD) ........72 emission control systems ............266 engine, number .................256 oil ..................139 pinging ..................136 starting ..................88 stopping ..................88 sub-transmission ..............152 won’t start ................228 environment ................223 final gear oil ..............156, 158 flag pole bracket ................71 flat tire ..................235 FLV NORMAL indicator ...............21 FLV SPORT indicator ..............21...
Page 293 Index gap, spark plug ..............177, 260 gasohol ..................270 gasoline ..................136 gear position indicator ..............35 headlight switch .................39 high coolant temperature indicator ..........19 hill start assist (HSA) ..............45 hill start assist (HSA) indicator .............20 hill, approaching a hill ..............108 crossing a hill .................110 driving down a hill ..............109 driving up a hill ..............109 stopping on a hill ..............109...
Page 294 Index indicators, AT indicator ................36 clutch temperature indicator ..........20, 240 electric power steering (EPS) indicator ........19 FLV NORMAL indicator ............21 FLV SPORT indicator ..............21 FLV warning indicator ..............21 gear position indicator .............35 high coolant temperature indicator ........19, 238 hill start assist (HSA) indicator ..........20 I - 4WD indicator ..............20 LAUNCH MODE indicator ............21 LOW indicator .................36...
Page 295 Index labels, safety .................6 Launch Mode ................98 LAUNCH MODE indicator ............21 LAUNCH MODE switch ...............46 limit, cargo ................3, 84 loading guidelines ..............85 LOW indicator ................36 low oil pressure indicator ............20 lubrication, engine oil ................140 final gear oil ..............156, 158 points ..................172 maintenance, importance ................115 maintenance minder indicator .........33, 119...
Page 296 Index obstacles, avoiding ..............110 odometer ...................29 odometer display ................28 oil, engine ...................140 final gear ...............156, 158 owner’s manual storage ............130 oxygenated fuels ..............270 parking ..................102 passenger, handhold .................64 no carrying in cargo bed ............3 pedal, accelerator ..............174 PGM-FI malfunction indicator lamp (MIL) ........19 pinging, engine ................136 plug, spark ................176 pre-drive inspection ..............80...
Page 297 Index safety, driving precautions ..............103 important precautions ............117 labels ..................6 schedule, maintenance .............118 seat belt indicator ...............19 seat, belts ..................59 position adjustment ..............57 removal .................132 serial numbers ................256 service, customer ................279 manuals ................276 warranty ................278 shift paddle ................48 shifting ..................40 side nets ..................53 spark arrester ................179 spark knock ................136...
Page 298 LAUNCH MODE ...............46 SPORT ..................44 tires, air pressure ................195 flat ..................235 repairing ................199 replacing ................200 tread conditions ............197, 198 tool kit ..................129 transporting your Honda ............218 tripmeter ..................29 trouble, unexpected ..............225 troubleshooting, starting ............228 turning, on level ground ............107 Index...
Page 299 Index vehicle identification no. (VIN) ..........256 warning labels ................6 warranty, coverage ................277 extended ................277 service ...................278 washing your SXS ..............210 water, driving through ..............111 weight limit ................84 wheel removal ................236 Index...
Page 300: Quick Reference
Quick Reference The following is a brief, but important collection of information you Quick Reference need to know about your Honda. You’ll also find space to record important notes. How To Avoid Costly Repairs The engine of your Honda can be the most expensive component to repair.
Page 301 Quick Reference Engine No. Color Label Owner’s Name Address City/State Phone Dealer’s Name Address City/State Phone Service Mgr. Quick Reference...
Page 302 Sub-Transmission resource conserving on the circular API Oil/Capacity service label, SAE 10W-30, JASO T 903 standard MA, Pro Honda GN4 4-stroke oil or Honda 4-stroke oil, or an equivalent engine oil after draining: 5.8 US qt (5.5 ℓ) after draining & engine oil filter change: 6.08 US qt (5.75 ℓ)
Page 303 18 psi (120 kPa) Spark Plugs standard: SILMAR8A9S (NGK) Coolant Ethylene glycol antifreeze (silicate-free) for aluminum engines in 50/50 solution with Pro Honda HP Coolant or an equivalent distilled water Fuses main: 50 A circuit: SXS1000S4X 30 A × 2, 15 A × 2, 10 A ×...
Page 304 Quick Reference These symbols are used in Driver Controls section: SYMBOL COMPONENT SEE PAGE START — ignition switch ON — ignition switch OFF — ignition switch Low beam — headlight switch High beam — headlight switch Park — Reverse — Neutral — High P, R, N, H, L —...
Page 305 California Proposition 65 Warning WARNING: Operating, servicing and maintaining a passenger vehicle or off-highway motor vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm.
Page 306 31HL7620 PRINTED IN USA 00X31-HL7-6201...

This manual is also suitable for:

Talon sxs1000s4xd 2022

Honda TALON SXS1000S4X 2022 Owner's Manual

Table of Contents

Instruments & Controls

Before Driving

Basic Operation & Driving Guidelines

Servicing Your Honda

Tips

Taking Care of the Unexpected

Technical Information

Quick Links

Chapters

Related Manuals for Honda TALON SXS1000S4X 2022

Summary of Contents for Honda TALON SXS1000S4X 2022

This manual is also suitable for:

Table of Contents