Honda PIONEER SXS1000 2016 Owner's Manual page 157

Changing Oil
Refer to Safety Precautions on page 111.
Change the oil with the front final gear at normal operating
temperature to assure complete and rapid draining.
1. Park the Honda SXS on a firm, level surface.
2. Place an oil drain pan under the oil drain plug.
3. Remove the oil fill cap and the drain plug.
4. After the oil has completely drained, reinstall the drain plug with
a new sealing washer and tighten it to the specified torque:
9 lbf·ft (12 N·m , 1.2 kgf·m)
5. Fill the front final gear with the recommended oil.
11.5 US oz (340 cm
6. Make sure the oil level is at the lower edge of the oil fill inspection
hole.
7. Apply a thin coat of grease to a new O-ring, and insert it into the
oil fill cap groove.
8. Install and tighten oil fill cap to the specified torque:
9 lbf·ft (12 N·m , 1.2 kgf·m)
9. Pour the drained oil into a suitable container and dispose of it in
an approved manner (page 215).
NOTICE
Improper disposal of drained fluids is harmful to the environment.
LEFT FRONT
oil fill cap
Front Final Gear Oil
)
3
lower edge of oil
fill inspection hole
oil fill cap O-ring
sealing washer
Servicing Your Honda
oil drain
plug
153