Honda PIONEER SXS1000 2016 Owner's Manual page 84

Is Your Vehicle Ready to Drive?
Steering Check the steering to make sure it turns smoothly in both
gearbox and directions. Check for any tears in the boots.
boots If any tears are found, see your dealer.
Underbody Check for and remove any debris stuck in the
underbody; take extra care in your inspection if the
vehicle was last driven in deep grass, brush, a wetland,
or flooded area. Check for any visible dents or cracks.
If any dents or cracks are found, see your dealer.
Suspension Check the condition of all suspension components. Be
sure to look for bends or oil leaks in the cushion
damper. Check for tears in the boots of the front arm
ball joint.
Lights Make sure the headlights, taillights, and brake lights
are working properly.
Controls Check that all driving controls, including the
accelerator pedal, brake pedal, drive mode select
lever, shift select lever, and shift paddles are operating
smoothly.
Tie-rod ends The wheels need to be lifted off the ground to
correctly check the tie-rod ends, so it cannot be done
in the pre-drive inspection. To have the tie-rod ends
properly inspected, see your dealer.
Cargo Be sure items in the cargo bed are within the cargo
limit and are properly secured to prevent shifting
(pages 81, 82).
(cont'd)
Before Driving
79