Honda PIONEER SXS1000 2016 Owner's Manual page 149

Install a New DCT Oil Filter:
Place shop towels under the oil filter cover because oil will flow out.
12. Remove the DCT oil filter cover (DCT marked) and O-ring by
removing the bolts. Let the remaining oil drain out. Discard the oil
filter in an approved manner (page 215).
13. Apply engine oil to a new O-ring and install it to the engine oil
filter cover. Install a new oil filter.
Use only the Honda Genuine oil filter or a filter of equivalent
quality specified for your model. Using the wrong Honda filter,
inserting a filter in backwards, using a filter with no OUTSIDE
markings, or a non-Honda filter which is not of equivalent quality
may cause engine damage.
14. Install a new filter with the OUTSIDE mark facing outward,
reinstall the spring and engine oil filter cover making sure the
bolts are tightened to the specified torques:
9 lb·ft (12 N·m , 1.2 kg·m)
NOTICE
Improper installation of the oil filter can cause serious engine
damage.
LEFT SIDE
spring
o-ring
bolt
Engine Oil & Filters
OUTSIDE mark
oil filter
DCT oil filter cover
Servicing Your Honda
(cont'd)
145