Driving Through Water - Honda PIONEER SXS1000 2016 Owner's Manual

Driving Guidelines

Driving Through Water

Before driving through water, stop and make sure that:
• The water is not more than about 10 inches (25 cm) deep.
• The water is not flowing too fast. Deep rushing water can sweep
you downstream. Even very shallow rushing water can wash the
ground from under your tires and cause you to lose traction and
possibly roll over.
• Both banks have gradual slopes and good traction, so you can
enter the stream and exit safely.
• The surface under the water appears to provide good traction.
Remember, the water may hide hazards, such as rocks, holes,
mud, or slippery vegetation.
If you decide you can safely cross the water:
• Proceed at a slow, steady speed.
• Watch for submerged obstacles, including slippery rocks and
holes.
NOTICE
Water entering the air intake system can cause severe engine
damage.
If your Honda SXS becomes immersed in water (water level is above
the foorboard), do not start the engine. Take your Honda SXS to
your dealer for service.
If the engine stalled while driving through water, inspect the vehicle
before starting the engine. Refer to If Your Honda SXS Becomes
Immersed in Water, page 242.
104
Basic Operation & Driving Guidelines