Front Final Gear Oil - Honda PIONEER SXS1000 2016 Owner's Manual

Front Final Gear Oil

Oil Recommendation
API classification
type
viscosity (weight)
suggested oil
Checking Oil
Refer to Safety Precautions on page 111.
Check the final gear oil level every 1,800 miles (3,000 km) or 300
hours of operating your Honda SXS and add, if needed.
1. Park your Honda SXS on a firm, level surface.
2. Remove the oil fill cap.
3. Make sure the oil level is at the lower edge of the oil fill inspection
hole.
4. Apply a thin coat of grease to a new O-ring, and insert it into the
oil fill cap groove.
5. Install and tighten oil fill cap to the specified torque:
9 lbf·ft (12 N·m , 1.2 kgf·m)
LEFT FRONT
152
Servicing Your Honda
GL-4 or GL-5 except oils labeled as
energy conserving on the circular
API service label
hypoid gear oil
SAE 80W-90
Honda shaft drive oil or equivalent
lower edge of oil fill
inspection hole
oil fill cap
oil fill cap O-ring