Advertisement
ADDITIONAL SAFETY RULES FOR TOOL
Hold tools by insulated gripping surfaces
1.
when performing an operation where the
cutting tool may contact hidden wiring or
its own cord. Contact with a "live" wire
will make exposed metal parts of the tool
"live" and shock the operator.
Always be sure you have a firm footing.
2.
Be sure no one is below when using the
tool in high locations.
SAVE THESE INSTRUCTIONS
4
Hold the tool firmly with both hands.
3.
Always use the side grip.
Keep hands away from rotating parts.
4.
Do not leave the tool running. Operate the
5.
tool only when hand-held.
Do not touch the bit or the workpiece
6.
immediately after operation; they may be
extremely hot and could burn your skin.
ENB002-1
Advertisement
