Light Kit Installation; Fitter Plate; Light Housing; Light Ring - Honeywell WICKER PARK Manual

19. Remove the pre-assembled fitter plate screws from
the fitter plate. Connect the 9-pin connector from
the fan to the 9-pin connector to the light kit.
Then, lift the light kit over the fitter plate and
secure the light kit to the fitter plate using the three
previously removed fitter plate screws (Fig. 19).
Fitter Plate Screw
20. Unscrew and remove the light rings from the
bottom of the three light housings. Then, install
the halogen bulbs and re-install the light rings
(Fig. 20).
21. Attach the pull chain extensions to fan and light
pull chains. The fan pull chain extends from the
side of the light kit and the light pull chain extends
from the center of the light kit. (Fig. 21)
Fan Pull Chain
Extension

LIGHT KIT INSTALLATION

Light Pull Chain
Extension
Fig. 19
Fig. 20
Fig. 21
13
9-pin Connector
Halogen Bulb

Light Ring

Fan
Pull Chain

Fitter Plate

Screw
Light
Housing
Light
Pull
Chain
Pull Chain
Extension