Honeywell WICKER PARK Manual page 9

STANDARD OR ANGLE MOUNTING INSTRUCTIONS
12. Remove the six motor screws from the top of the
motor assembly and keep for blade attachment
(Fig. 12).
Motor Screw
with Washer
13. Install the ball end of the downrod into the
mounting bracket opening. Align the slot in the ball
with the tab in the mounting bracket. If installed
correctly, the downrod should not rotate in the
mounting bracket (Fig. 13).
!
WARNING
Failure to align the slot in the downrod with the tab
on the mounting bracket could cause the fan to fall,
which could result in serious injury or death.
a
!
Fig. 12
Motor Screw
with Washer
Fig. 13
Mounting
Bracket
9
Tab
Slot
Downrod
Ball