Call Pickup; Conference Calls; Call Forward - Cisco 6851 User Manual

Cisco 6851 MPP User Guide

Call Pickup

If you are a member of a Call Pickup Group, you can answer a ringing phone by using the Call Pickup
Feature access code from your own phone. If there are a couple of phones in your Call Pick Up
group that are ringing, when you press the *98 you will answer the phone that was ringing first.
1. Tap the Group Pick Up soft key.
Note: If more than one phone within the Pick Up group is ringing, you will pick up the phone that was
ringing first.
Chose which ringing phone within your Pick Up group that you want to redirect to your phone:
1. Press the Group Pick Up softkey
2. Enter the extension of the phone you want to redirect
3. Press the Call softkey
Note: Call Pick Up Groups will only be available if set up by your Group Administrator

Conference Calls

To create an ad hoc conference call with up to 8 parties (you and up to 7 other parties)
While on a call
1. Press the Conference
2. Dial the next participant
3. Press the Conference
Repeat the instructions above to add other parties to your conference call

Call Forward

Set Forwarding on your desk phone to redirect incoming calls to an alternative number or your
voicemail.
To enable Forwarding to an alternate number:
1. Press the Forward softkey
2. Enter the destination number
A forward icon and the destination number is displayed on your phone
To enable Forwarding to your voicemail:
3. Press the Forward softkey
4. Press the Voicemail button
A forward icon and *62 is displayed on your phone
To disable Forwarding:
5. Press the Clr fwd softkey
Cisco 6851 MPP User Guide
button or Conf softkey
button again or the Conf softkey to connect all parties
or dial *62
3
10/08/20