Connecting The Power Cord; Binding Cables - Sharp PN-LC862 Operation Manual

Caution
• Use only the power cord supplied with the monitor.
1. Turn off the main power switch.
2. Plug the power cord (supplied) into the AC input terminal.
3. Plug the power cord (supplied) into the power outlet.
TIPS
• Be sure to clamp the power cord (supplied) by using the supplied cable clamp. When clamping the power cord, take care not
to stress the terminal of the power cord. Do not bend the power cord excessively.
The supplied cable clamps can be used to clamp the power cord and cables connected to the back of the monitor.
Attach the supplied cable clamps to a flat surface, removing any dust or dirt before attaching.
Do not attach over a vent.
14
E

Connecting the Power Cord

2
Power cord (Supplied)
3
For power outlet

Binding Cables

Cable clamp
Affixing point
AC input
terminal
PN-LC652
Main power switch Main power switch
1
Power cord (Supplied)
Cable clamp (Supplied)
Cable
1