Connecting The Power Cord; Binding Cables; Cable Clamp - Sharp InGlass PN-LA862 Operation Manual

Connecting the Power Cord

Caution
• Use only the power cord supplied with the monitor.
• When connecting the power cord to the product's AC
input terminal, make sure the connector is fully and firmly
inserted.
1. Turn off the main power switch.
2. Plug the power cord (supplied) into the AC input
terminal.
3. Plug the power cord (supplied) into the power outlet.
TIPS
• Be sure to clamp the power cord (supplied) by using the supplied cable clamp. When clamping the power cord, take care not
to stress the terminal of the power cord. Do not bend the power cord excessively.
The supplied cable clamps can be used to clamp the power cord and cables connected to the back of the monitor.
Attach the supplied cable clamps to a flat surface, removing any dust or dirt before attaching.
Do not attach over a vent.
Power cord
(Supplied)
For power
outlet
PN-LA652
Power cord (Supplied)
Cable clamp (Supplied)
Binding Cables

Cable clamp

Affixing point
PN-LA652
AC input terminal
2
Main power switch
3
1
AC input terminal
Cable
Main power switch
1
2
Power cord (Supplied)
3
For power outlet
15
E