Sharp PN-LC862 Operation Manual page 50

Menu Items
n Input
Input settings
Size (HDMI/D-SUB/USB-C/DisplayPort/Video/OPS)
Changes the screen size. (See page 28.)
PC mode (HDMI)
Configures the contents to be displayed on the HDMI input terminal.
Auto ........................ Switches automatically.
PC ........................... Displays as a computer.
Video ....................... Displays as an AV device.
CEC settings (HDMI)
Makes settings for linkage with devices connected to HDMI input terminal through HDMI CEC.
HDMI CEC link
When this setting is set to on, the link will be used.
When this setting is set to off, the link will not be used.
Auto power on ............ When "HDMI CEC link" is set to on, sets whether or not to turn this monitor ON by linking to the
HDMI modes (HDMI)
"HDMI modes" settings determines how the video signal is processed and decoded at the HDMI input.
Mode1 ..................... Normally used.
Mode2 ..................... Used when proper display cannot be performed in "Mode1", such as when a device that is not
VGA image (D-SUB)
The "Clock", "Phase", "H Position", and "V Position" are automatically adjusted.
Executed when "Auto" is touched. Use this automatic adjustment when you use the "D-SUB" to display a computer screen
for the first time or when you change the setting of the computer. (See page 52.)
H position (D-SUB)
Adjust the horizontal position of the image.
V position (D-SUB)
Adjust the vertical position of the image.
Clock (D-SUB)
Adjusts frequency for sampling clock for applicable video. Adjust when there is flickering in the form of vertical stripes.
When using the adjustment pattern (see page 52), make adjustments so that no vertical stripe noise appears in it.
Phase (D-SUB)
Adjusts sampling clock phase for applicable video. Useful when small characters appear with low contrast and/or there are
flickers at corners. When using the adjustment pattern (see page 52), make adjustments so that no horizontal stripe noise
appears in it.
* Adjustments to "Phase" should be made only after "Clock" has been correctly set.
Others
No signal auto input select
Configures whether or not to automatically switch to a different input mode when signals become absent in the current input
mode.
The "Last input mode" is the previous input mode.
Connect auto input select
Sets whether or not the input into the input terminal automatically changes when a video signal is input into that terminal.
The input via the expansion slot is ignored. (With some input signals, the input may not change.)
Start input mode
You can set the input mode that will be in effect when the power is turned on.
When this is set to "Last input mode", the input mode when the power was last turned off will appear.
Startup app
When "Start input mode" is set to "APPLICATION", sets the applications to be started automatically.
Input mode name
You can change the input mode name for each input terminal.
50
E
operation of the devices.
This will support most common color spaces and other encoding signals.
compatible with 4K is connected.