Reset/Functional Restriction Setting (Function Menu) - Sharp PN-LC862 Operation Manual

Reset/Functional Restriction Setting (Function menu)

You can reset the settings to the factory default settings or
restrict operations. When you use Function menu, a password
is required. (Factory setting) (See page 45.)
Perform the operation from the remote control unit.
1. Press the FUNCTION button, and then press the MENU
button within 10 seconds.
The Function menu appears.
All reset
Resets the settings to the factory default settings.
In APPLICATION mode, only the settings of the factory-
installed applications are initialized.
If you select "All reset", a confirmation message is
displayed. Select "All Reset".
This monitor restarts when initialization ends.
Monitor lock
You can disable operations on the monitor that use buttons.
Off:
Enables operation.
All buttons:
Locks monitor buttons operation.
Touch:
Locks touch operation.
All buttons & touch:
Locks monitor buttons and touch operation.
Remote control lock
You can disable operations on the remote control unit that
use buttons.
Off:
Enables operation.
All buttons:
Locks all button operations.
Except power & volume:
Locks operations other than power operation and
VOLUME +/-.
Application lock
Sets whether or not to lock the use of the following
application.
• Updater
• Computer control
• EShareServer
• Web Browser
Closing the Function menu
• Press the RETURN button on the remote control unit.
53
E