Sharp PN-LC862 Operation Manual page 13

8. TOUCH PANEL1 terminal
• To use the touch panel with a computer connected to
an HDMI1 input terminal, connect the touch panel to the
computer with a USB cable (USB2.0 Type B or USB3.0
Type B).
9. TOUCH PANEL2 terminal
• To use the touch panel with a computer connected to the
video input terminal on the rear of the monitor, connect
the touch panel to the computer with a USB cable (USB2.0
Type B or USB3.0 Type B).
10. Audio input terminal
• Use an audio cable without resistance.
11. HDMI output terminal
• The screen displayed on this monitor and the audio output
from this monitor can be output to an external device.
• Use a commercially available HDMI cable (conforming to
the HDMI standard) that supports 4K.
• When the input video is encrypted with copyright
protection, the video cannot be output.
• When outputting the APPLICATION mode screen, the
external device must support HDCP.
12. Audio output terminal
• Audio that is input into the monitor is output.
• The output sound varies depending on the input mode.
• When a cable is connected to the audio output terminal,
audio is not output from the monitor speaker.
• "Bass", "Treble", and "Balance" cannot be adjusted in the
"Audio" of the General menu.
13. Digital audio output (optical) terminal
• Audio that is input into the monitor is output.
• Connect using a commercially available audio digital
cable.
• The output sound varies depending on the input mode.
14. RS-232C input terminal
• You can control the monitor from a computer by
connecting a commercially available RS-232 straight
cable between these terminals and the computer.
For details, please refer to the manual on the following
website.
https://www.sharp.eu/download-centre
15. LAN terminal
• You can connect to a network by using a commercially
available LAN cable.
• This monitor can be controlled via a network from a
computer on the network. For details, please refer to the
manual on the following website.
https://www.sharp.eu/download-centre
16. USB port (USB 3.0 compliant, Type-A)
• When the input mode is HDMI1, the USB port can be
used for a computer connected to the TOUCH PANEL1
terminal.
• When the input mode is HDMI2, HDMI3, DisplayPort
or D-SUB, the USB port can be used for a computer
connected to the TOUCH PANEL2 terminal.
• When the input mode is APPLICATION, the USB port can
be used for APPLICATION mode.
• When the input mode is OPS, the USB port can be used
for the computer of the expansion slot.
Connecting Peripheral Equipment
* Do not switch the input mode when a USB flash drive is
connected. This could corrupt the data on the USB flash
drive. Switch the input mode after removing the USB flash
drive. To save data to the USB flash drive, connect the
USB flash drive to the USB port for APPLICATION mode
(see below).
17. USB port for APPLICATION mode (USB3.0 compliant,
Type-A)
• The USB port can be used for APPLICATION mode.
(The USB connection does not change even if the input
mode is changed.)
• Connect to this port when using the wireless adapter
(supplied). (See page 16.)
nUSB port in the APPLICATION mode
• Connect USB devices (memory device, keyboard, mouse)
that you want to use in APPLICATION mode.
Supported USB flash drives
File System FAT32
Up to 64 GB
Capacity
(The maximum file size is 4 GB)
• A USB flash drive that is encrypted or has a security
function cannot be used.
• Use a USB flash drive with a shape that can be inserted in
the USB port. Some USB flash drives with special shapes
cannot be inserted. Do not forcibly insert a USB flash drive.
This may damage the connector or cause failure.
TIPS
• You can prohibit the use of USB flash drive. (See page 51.)
nHow to remove a USB flash drive
1. Start "File Manager". (See page 37.)
2. Select the USB flash drive to remove, and then touch
.
TIPS
• To remove a USB flash drive connected to a computer,
refer to the manual of the computer.
13
E