Connecting The Power Cord; Binding Cables - Sharp EP-C251 Operation Manual

This monitor does not require a power source to display the image, but it does require a power source to change the display
image or settings.
1. Connect the monitor to the power outlet using the supplied AC adapter and power cord.
NOTE
• Use only the power cord and AC adapter supplied with the monitor.
• AC adapter included with EP-C251 is not suitable for use in locations where children are likely to be present.
• Be sure to clamp the cord of the AC adapter (supplied) by using the supplied cable clamp.
When clamping the cord, take care not to stress the terminal of the cord. Do not bend the cord excessively.
The supplied cable clamps can be used to clamp cables connected to this monitor.
Attach the supplied cable clamps to a flat surface, removing any dust or dirt before attaching.

Connecting the Power Cord

Power input terminal

Binding Cables

Cable clamp
Affixing point
For power
outlet
Power cord (Supplied)
AC adapter (Supplied)
Cable
7
E