Connecting Peripheral Equipment - Sharp PN-LC862 Operation Manual

Connecting Peripheral Equipment

1 8 16
Caution
• Be sure to turn off the main power switch and disconnect
the plug from the power outlet before connecting/
disconnecting cables. Also, read the manual of the
equipment to be connected.
• Be careful not to confuse the input terminal with the output
terminal when connecting cables. Accidentally reversing
cables connected to the input and output terminals may
cause malfunctions and other problems.
• Do not use any cable that has a damaged or deformed
terminal. Using such cables may cause malfunctions.
TIPS
• Operation is not guaranteed for all connected devices.
• Use the automatic screen adjustment when a computer
screen is displayed for the first time using D-SUB or when
the setting of the computer is changed. The screen is
adjusted automatically using "Auto" on the Input menu.
• If the audio output from the playback device is connected
directly to speakers or other devices, the video on the
monitor may appear delayed from the audio portion.
Audio should be played through this monitor by connecting
the playback device to the monitor's audio input, and
connecting the monitor's audio output to the speakers or
other devices.
• Line speakers (connected to the audio output terminal),
USB speakers, and Bluetooth speakers cannot be used at
the same time.
When connecting speakers, use only one of them.
The TOUCH PANEL terminal is USB3.0 Type B.
Although the connector shape is different, the supplied
USB cable (USB 2.0 Type B) can be connected to the
TOUCH PANEL terminal.
12
E
14 15 12 13
1. HDMI1 input terminal
2. HDMI2 input terminal
• Use a commercially available HDMI cable (conforming to
the HDMI standard) that supports 4K.
3. HDMI3 input terminal (support ARC)
• Use a commercially available HDMI cable (conforming to
the HDMI standard) that supports 4K. When connecting
to ARC-compatible devices, please use cable that support
even more ARC.
4. USB Type C port
• Connect to the computer with a commercially available
USB cable (Type C, conforming to the USB standard).
• You can connect a device that supports DisplayPort
alternate mode. In order to supply power to connected
devices, it is necessary to support the Power delivery
standard.
• For USB Power Delivery 65W charging, please use a
cable that supports a current rating of 5A. Charging is
limited to 60W when using a cable that supports a current
rating of 3A.
• Be sure to clamp the USB Type C cable (commercially
available) by using the supplied cable clamp (see page
14). When clamping the USB Type C cable, take care not
to stress the USB Type C cable. Do not bend the USB
Type C cable excessively.
• There is no need to connect the USB cable to the TOUCH
PANEL terminal.
• When input mode is changed to USB-C, this monitor will
be recognized by the connected computer.
5. D-sub input terminal
6. Mini AV input terminal
• A conversion cable must be purchased separately.
Video Audio (R)
Audio (L) GND
7. DisplayPort input terminal
• Use a commercially available DisplayPort cable
(conforming to the DisplayPort standard) that supports 4K.
10 5 6 7
Video
Audio (L)
Audio (R)
11
17
16
4
9
2
3