Table of Contents
Advertisement
RAELink3 2.4GHz User's Guide
13.8 Modem Configuration Menu
In this program mode, the onboard modem configuration menu
can be output and accessed via PC using a HyperTerminal
program.
IMPORTANT!
Do not enter and change any parameters in this menu unless
directed to do so by authorized technical support personnel.
Note: The RAELink3 2.4GHz must be connected to a computer
with a cable, and a HyperTerminal program must be running.
The Modem Configuration screen is shown here:
Modem Menu
Enter?
Press [Y/+] to output the modem menu to a PC, or press [N/-]
to skip to the beginning of the programming menus
Alternatively, you can press [MODE] to exit Programming
Mode.
41
Advertisement
Table of Contents
