Honeywell RAELink3 2.4GHz User Manual page 27

RAELink3 2.4GHz User's Guide
To accept the new Network ID, press and hold [MODE] for 2
seconds. A confirmation screen appears, as shown here:
Network ID: 0001
1234 Save?
Press [Y/+] to save, or press [N/-] to abort the change.
If you save the Network ID, you see this display as it saves:
Network ID: 1234
Saving...
When it is done, the display returns to the Set Network ID
screen, showing the new Network ID:
Network ID: 1234
Change?
If you want to change the Network ID, repeat the procedure.
To progress to the next screen, Set Operation Mode, press
[N/-].
27