Simultaneous Bt And Cable Operation - Honeywell RAELink3 2.4GHz User Manual

RAELink3 2.4GHz User's Guide

13.3.2 Simultaneous BT And Cable Operation

You can use a single RAELink3 2.4GHz in Remote Mode to
transmit data from a Bluetooth-enabled and a cable-connected
device simultaneously.
Here is a table showing supported RAE Systems and third-
party devices, arranged by Cable or Bluetooth connection:
Cable
QRAE Plus
MultiRAE Plus
MiniRAE2000
ppbRAE Plus
ChemRAE
DustTrakII
To connect two devices simultaneously, make sure of the
following:
• Each device must have a unique Unit ID.
• The correct device must be selected in the BT and Cable
menus.
Example: To connect a MultiRAE Plus and a BioHarness to
the same RAELink3 2.4GHz, in Remote settings, select "Cable:
Bypass." Then select "BT: BioHarness."
Note: If one of the two channels (Cable or Bluetooth) is not
connected to a device, it is not necessary to select a setting for
the unused channel.
Bluetooth
MiniRAE3000
ppbRAE3000
UltraRAE3000
GammaRAEII R
BioHarness
32