Casio CASSIOPEIA EG-800 Service Manual And Parts List page 32

See the User's Guide for details about initializing memory."
This message indicates that the memory error is fatal and so recovery is impossible.
Press the [Action] control to execute a full reset (memory initialize), which deletes all data stored in
memory.
• Pressing the [Action] control should display the Startup screen followed by the touch screen
calibration screen. The remainder of this procedure indentical to the Initial Setup described in the
Quick Start Guide. Perform the steps of the Initial Setup procedure.
• If pressing the [Action] control returns to the desktop without displaying the startup screen first, see
the following explanation for the procedure you need to follow.
What to do if the startup screen does not appear when you press the [Action] control
Even though the desktop appears when you press the [Action] control, there is still a data error in
memory and you have to perform a full reset (memory initialize). Before you do, however, there is the
chance that some of the data in memory can be recalled and even transferred to a computer. Try recalling
the data you need before performing the procedure described below to perform a full reset.
Important
Do not use the ActiveSync backup function to back up data to a computer when you suspect a data error.
Doing so may also include the corrupted data that is causing your problem, which means the problem
will reappear when you restore the data.
Full Reset (Memory Initialize)
Full reset (memory initialize) deletes all data, and resets all unit parameters to their initial defaults.
The following are conditions when you should perform a full reset.
• When you want to delete all memory data and return unit settings to their factory defaults
• When you forget your password and need to clear it
• When a data error causes operational problems
• Appearance of the message: "A problem with memory contents has been found..."
Performing a Full Reset
Important
• The following procedure deletes all data in memory. Be sure that data is backed up or that you no
longer need it before performing the following procedure.
• If there is a CompactFlash Card in the CASSIOPEIA's slot, remove the card before performing the
full reset.
1. Make sure that unit power is turned on.
2. While holding down the [Power] button, use the stylus to hold down the RESET button for about
two seconds.
• This causes the following message to appear on the display screen.
"Proceeding with this operation initializes memory. Press [Action] to proceed or [Record] to
cancel."
3. Press the [Action] control.
• This causes the following message to appear on the display screen.
"Proceeding with this operation deletes all data stored in memory. Press [Action] to proceed or
[Record] to cancel."
— 29 —