Reset Operation And Battery Replacement; Reset Operation And Full Reset - Casio CASSIOPEIA EG-800 Service Manual And Parts List

5. RESET OPERATION and BATTERY REPLACEMENT

5-1. Reset Operation and FULL RESET

Resetting the Unit
"Reset" is similar to a computer reboot. Performing a reset deletes any data that is in the process of
being input or edited, without yet being saved. Data stored in memory and all settings, however, are
retained.
Perform the reset operation whenever the unit fails to operate correctly due to operational error or some
other abnormality. Either of the following symptoms indicates that reset is required.
• If the unit dose not respond when you tap the screen or press a button.
• If the icon that indicates a procedure is in progress remains on the display for a long time.
Important
We strongly recommend that you back up the data in CASSIOPEIA memory, if possible, before performing
a reset. Normally the reboot-type reset does not delete data in CASSIOPEIA memory. If corrupted data
is discoverd, however, all data stored in memory will be deleted. Not matter what type of computing
device you are using, it is always a good idea to back up memory contents periodically to protect against
unexpected loss of data.
Performing a Reset
1. Use the stylus to press the RESET button.
• The unit performs a reset followed by a memory check operation.
If no data error is found, the following two screens appear on the display in succession.
• Startup screen
• Desktop
2. Normal unit operation is possible after the desktop appears.
• Memory data and settings are retained when you reset the Pocket PC.
Important
If the above operation does not solve the problem, perform a full reset.
Refer to the next page concerning FULL RESET.
Memory Error Message
If the memory check operation that the unit performs when the RESET button is pressed detects a data
error, the following message appears on the screen instead of the startup screen.
"A problem with memory contents has been found. Press [Action] to continue with the reset
procedure, which restores normal system operation.
Note that if the system determines that user memory cannot be repaired, it will delete all user
data currently in memory.
— 28 —