Casio CASSIOPEIA EG-800 Service Manual And Parts List page 24

Mounting the CASSIOPEIA Onto the Cradle
Important
Make sure that CASSIOPEIA power is turned off before you place it onto or remove it from the cradle.
Use the following procedure to place the unit onto the cradle.
1. Place the cradle on a desk or other flat, level surface.
2. Turn off the CASSIOPEIA.
3. Place the CASSIOPEIA onto the cradle as shown in the illustration.
4. Orient the CASSIOPEIA in relation to the cradle as shown in the illustration below.
Important
• Align the CASSIOPEIA properly with the grooves and slide it into the cradle as far as it will go.
To remove the CASSIOPEIA from the cradle
Slide the CASSIOPEIA straight up from the cradle.
— 21 —