Makita TD002G Instruction Manual page 10

Disabling the quick mode-switching button
You can also disable the quick mode-switching button. After
disabling, the quick mode-switching button will not work for
changing the impact force and switching the application mode.
To disable the quick mode-switching button, press and
hold the quick mode-switching button and the but-
ton at the same time until the all lamps on the panel
blink.
Quick reference
The following table shows the functions of the quick mode-switching button.
indicates the quick mode-switching button.
Button(s) / Purpose
(When the application mode is not
registered)
Changing the impact force by the quick
mode-switching button
(When the application mode is regis-
tered)
Switching to the registered application
mode
Registering the application mode
Erasing the registered application mode
Disabling the quick mode-switching
button
(When the application mode is regis-
tered)
Resuming the quick mode-switching
button
(When the application mode is not
registered)
Resuming the quick mode-switching
button
: The lamp is blinking.
To resume the quick mode-switching button, perform
the same procedure as above again.
NOTE: Registering and erasing the application mode
can be performed even if the quick mode-switching
button is disabled. After registering or erasing the
application mode, the quick mode-switching button
will be activated.
Action
Press
Press
Press and hold (each button)
Press and hold (each button)
Press and hold (each button)
Press and hold (each button)
Press and hold (each button)
10 ENGLISH
How to confirm
The front lamps on the tool flash once.
The front lamps on the tool flash once.
Example: Wood mode is registered
The lamp of desired application mode
blinks.
All impact force grade lamps blink.
All lamps on the panel blink.
Example: Wood mode is registered
The lamp of desired application mode
blinks.
All impact force grade lamps blink.