SXS1000M5P/M5D shown
UNDER CARGO BED
gear change
tool
9. Return the gear change tool to the tool kit.
10. Check that "E" is blinking. Next, tighten the emergency valve.
Proceed to "E" is blinking.
If "–" is not displayed in the gear position display and you change
the gear position by using the gear change tool, the DCT system will
automatically stop. To reactivate the system, turn the ignition switch
to the OFF (w) position, and then turn it back to the ON (q) position.
If the Transmission Is Not
Functioning Properly
Taking Care of the Unexpected
downshift
(counterclockwise)
upshift
(clockwise)
255