Tilt Bed Lever - Honda PIONEER 2022 Owner's Manual

Cargo Bed Controls

Tilt Bed Lever

Before raising the cargo bed, select a firm level surface and move the
shift select lever into the park (P) position.
Your Honda SXS has a tilt bed lever on the left and right front side of
the bed. Pulling either lever will allow you to lift the front end of the
bed, making it easier to dump items out the rear or to maintain the
air cleaner or lubricate the cargo bed pivots and cargo bed strikers.
To raise the front of the cargo bed, first make sure that the tailgate
has been unlatched and lowered, then pull the lever up.
SXS1000M5P/M5D:
Make sure the rear seats are stowed in place before raising the cargo
bed. The cargo bed should not be raised with the rear passenger
jump seats deployed. The cargo bed should not be raised with
passengers seated in the rear seats.
1. Pull up the tilt bed lever, then grasp the top of the bed.
2. Raise the front end of the cargo bed.
Do not drive the Honda SXS with the front end of the cargo bed
raised.
SXS1000M5P/M5D:
Do not open the rear doors while the cargo bed is raised. Opening
the rear doors while the cargo bed is raised may cause the seats to
flip up unexpectedly.
94 Instruments & Controls