Honda PIONEER 2022 Owner's Manual page 192

Changing Oil
Refer to Safety Precautions on page 137.
Change the oil with the rear final gear at normal operating
temperature to assure complete and rapid draining.
1. Park the Honda SXS on a firm, level surface.
2. Place an oil drain pan under the oil drain plug.
3. Remove the oil fill cap and the drain plug.
4. After the oil has completely drained, reinstall the drain plug with
a new sealing washer and tighten it to the specified torque:
9 lbf·ft (12 N·m, 1.2 kgf·m)
5. Fill the rear final gear with the recommended oil.
SXS1000M3P/M3D Deluxe/M5P/M5D Deluxe: 15.9 US oz (470 cm
SXS1000M3D Trail/M3D Forest/M5D Trail/M5D Forest: 18.6 US oz (550 cm
6. Make sure the oil level is at the lower edge of the oil fill inspection hole.
7. Apply a thin coat of grease to a new O-ring and insert it into the
oil fill cap groove.
8. Install and tighten oil fill cap to the specified torque:
9 lbf·ft (12 N·m, 1.2 kgf·m)
9. Pour the drained oil into a suitable container and dispose of it in
an approved manner (page 245).
NOTICE
Improper disposal of drained fluids is harmful to the environment.
RIGHT REAR
oil fill cap
lower edge of oil
fill inspection hole
oil fill cap O-ring
Rear Final Gear Oil
sealing washer
Servicing Your Honda
3 )
)
3
oil drain
plug
183