Makita PF400MP Original Instruction page 4

22. Follow the instruction manual of the power
unit for proper use.
23. Refer to the instruction manual of the power
unit for how to start and control the machine.
24. During operation always hold the tool with
both hands. Never hold the tool with one hand
during use.
25. Do not operate the tool in bad weather or if
there is a risk of lightning.
26. Before operation, make sure that the shoulder
harness is properly attached to the tool.
27. Do not submerge the machine in water or
place the machine on a wet surface.
28. Do not leave the tool unattended outdoors in
the rain.
29. During operation or while moving your oper-
ating position, be careful not to trip over the
hoses or pipes at your feet.
30. When you use the machine on muddy ground,
wet slope, or slippery place, pay attention to
your footing.
Transportation
1. Stop the machine during transportation.
Otherwise unintentional start-up may cause injury.
Vibration
1. Exposing to excessive vibration injures blood
vessels or nervous system of the operator and
causes the following symptoms in the fingers,
hands or wrists: "Falling asleep" (numbness),
tingling, pain, stabbing sensation, alteration of
skin color or of the skin. If any of these symp-
toms occur, see a physician.
To reduce the risk of "white finger disease",
keep your hands warm during operation and
well maintain the machine and accessories.
Maintenance and storage
1. Keep all nuts, bolts and screws tight to be sure
the machine is in safe working condition.
2. If the parts are worn or damaged, replace them
with parts provided by Makita.
Store the machine in a dry place out of the
3.
reach of children.
When you stop the machine for inspection,
4.
servicing, or storage, switch off the machine
and make sure that all moving parts come
to a complete stop, and remove the battery
cartridge.
5. Always clean dust and dirt off the equipment.
Never use gasoline, benzine, thinner, alcohol
or the like for the purpose. Discoloration, defor-
mation or cracks of the plastic components may
result.
6. Do not attempt any maintenance or repair not
described in this instruction manual or the
instruction manual of the power unit. Ask our
authorized service center for such work.
7. Follow instructions for lubricating and chang-
ing accessories.
8. Always use the genuine spare parts and acces-
sories only. Using parts or accessories supplied
by a third party may result in the equipment break-
down, property damage and/or serious injury.
9. Request our authorized service center to
inspect and maintain the machine at regular
interval.
10. Before storing the machine, perform full clean-
ing and maintenance. Remove the battery
cartridge.
11. Do not prop the equipment against something,
such as a wall. Otherwise it may fall suddenly
and cause an injury.
Battery tool use and care
1. Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack.
2. Use power tools only with specifically desig-
nated battery packs. Use of any other battery
packs may create a risk of injury and fire.
3. When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from one
terminal to another. Shorting the battery termi-
nals together may cause burns or a fire.
Under abusive conditions, liquid may be
4.
ejected from the battery; avoid contact. If con-
tact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medical
help. Liquid ejected from the battery may cause
irritation or burns.
5. Do not use a battery pack or tool that is dam-
aged or modified. Damaged or modified batteries
may exhibit unpredictable behaviour resulting in
fire, explosion or risk of injury.
6. Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or tem-
perature above 130 °C may cause explosion.
7. Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specified in the instruc-
tions. Charging improperly or at temperatures
outside the specified range may damage the
battery and increase the risk of fire.
Electrical and battery safety
Do not dispose of the battery(ies) in a fire.
1.
The cell may explode. Check with local codes for
possible special disposal instructions.
Do not open or mutilate the battery(ies).
2.
Released electrolyte is corrosive and may cause
damage to the eyes or skin. It may be toxic if
swallowed.
Do not charge battery in rain, or in wet
3.
locations.
Do not charge the battery outdoors.
4.
5. Do not handle charger, including charger plug,
and charger terminals with wet hands.
6. Do not replace the battery in the rain.
Do not replace the battery with wet hands.
7.
8. Do not replace battery in the puddle or on a
wet surface.
4 ENGLISH