Ready For Configuration - NETGEAR HR314 Reference Manual

Reference Manual for the Model HR314 802.11a Hi-Speed Wireless Router
Turn off the router, and then turn it on again and wait until the Test light turns off.
2.
Restart any computer that is connected to the router.
3.
Note: If the modem doesn't have an on/off switch, either pull the modem's power adapter out of
the wall socket or power down the power strip.

Ready for Configuration

After configuring all of your PCs for TCP/IP networking and connecting them to the local network
of your HR314, you are ready to access and configure the router. Proceed to the next chapter.
3-12 Preparing Your Network