Ethernet Cabling - NETGEAR HR314 Reference Manual

Note: The available channels supported by the wireless products in various countries are different.

Ethernet Cabling

Although Ethernet networks originally used thick or thin coaxial cable, most installations currently
use unshielded twisted pair (UTP) cabling. The UTP cable contains eight conductors, arranged in
four twisted pairs, and terminated with an RJ45 type connector. A normal "straight-through" UTP
Ethernet cable follows the EIA568B standard wiring and pinout as described in
Table B-5. UTP Ethernet cable wiring, straight-through
Pin Wire color
1 Orange/White
2 Orange
3 Green/White
4 Blue
5 Blue/White
6 Green
7 Brown/White
8 Brown
Network and Routing Basics
Reference Manual for the Model HR314 802.11a Hi-Speed Wireless Router
Signal
Transmit (Tx) +
Transmit (Tx) -
Receive (Rx) +
Receive (Rx) -
Table B-5.
B-15