Changing The Configuration Password - NETGEAR HR314 Reference Manual

Reference Manual for the Model HR314 802.11a Hi-Speed Wireless Router
To restore the factory default configuration settings without knowing the login password or IP
address, you must use the Default Reset button on the rear panel of the router. See "Using the
Default Reset Button to Restore the Factory Configuration and Password" on page 9-7.

Changing the Configuration Password

The default password for the router's Web Configuration Manager is password. Netgear
recommends that you change this password to a more secure password.
From the Main Menu of the browser interface, under the Maintenance heading, select Set
Password to bring up the menu shown in Figure 7-6.
Figure 7-6. Set Password menu
To change the password, first enter the old password, and then enter the new password twice. Click
Apply.
Maintenance 7-7