Rip Fence; Straight Cuts - Makita DJV185 Instruction Manual

Hide thumbs Also See for DJV185:

Table of Contents

To remove the dust cover, press one side of the cover,

and then remove it as shown in the figure.

Fig.20

► 1 . Dust cover

Installing or removing the dust

nozzle

You can connect this tool to a Makita vacuum cleaner

by attaching the dust nozzle.

Insert the dust nozzle all the way into the tool.

Fig.21

► 1 . Dust nozzle

To remove the dust nozzle, pull out the dust nozzle

while pressing the button on the dust nozzle.

Fig.22

► 1 . Button 2. Dust nozzle

Connecting the tool to the vacuum

cleaner

Connect the hose of the vacuum cleaner to the dust nozzle.

Fig.23

Rip fence

Optional accessory

CAUTION:

switched off and the battery cartridge is removed

before installing or removing accessories.

When repeatedly cutting widths of 160 mm or less, use

of the rip fence will assure fast, clean, straight cuts.

Fig.24

► 1 . Rip fence (Guide rule)

13 ENGLISH

Always be sure that the tool is

Table of Contents