Rip Fence; Straight Cuts - Makita XVJ05 Instruction Manual

To remove the dust cover, press one side of the cover,
and then remove it as shown in the figure.
1
Fig.20
► 1 . Dust cover
Installing or removing the dust
nozzle
You can connect this tool to a Makita vacuum cleaner
by attaching the dust nozzle.
Insert the dust nozzle all the way into the tool.
Fig.21
► 1 . Dust nozzle
To remove the dust nozzle, pull out the dust nozzle
while pressing the button on the dust nozzle.
1
Fig.22
► 1 . Button 2. Dust nozzle
Connecting the tool to the vacuum cleaner
Connect the hose of the vacuum cleaner to the dust nozzle.
Fig.23

Rip fence

Optional accessory
CAUTION:
switched off and the battery cartridge is removed
before installing or removing accessories.

Straight cuts

When repeatedly cutting widths of 160 mm (6-5/16") or
less, use of the rip fence will assure fast, clean, straight
1
cuts.
Fig.24
► 1 . Rip fence (Guide rule)
12 ENGLISH
Always be sure that the tool is
1
2