Related Manuals for Baratza Encore
Summary of Contents for Baratza Encore
- Page 1 ENCORE OPERATIONS MANUAL ® Encore™ Thank you for choosing the Encore coffee grinder. You’re on the road to making great tasting coffee! December 2022 (v4.3)
-
Page 2: Table Of Contents
ENCORE OPERATIONS MANUAL ® TABLE OF CONTENTS SAFETY INFORMATION PARTS IDENTIFICATION OPERATION CARE & CLEANING WARRANTY & SERVICE December 2022 (v4.3) -
Page 3: Safety Information
Baratza will not accept any liability for damage, injury, or warranty if the grinder is used other than for its intended Cleaning and user maintenance shall not be made by purpose (i.e. -
Page 4: Parts Identification
ENCORE OPERATIONS MANUAL ® PARTS IDENTIFICATION Hopper Lid Bean Hopper Grind Setting Indicator Hopper Gasket Removable Ring Burr Grind Settings Pulse Button Grounds Bin with Max Fill Line On/Off Knob * Brush * Weighted Base Grind Adjustment Ring Grind Adjustment Tab Burr Alignment &... -
Page 5: Operation
ENCORE OPERATIONS MANUAL ® OPERATION INITIAL SETUP Remove the contents from the packaging and hand-wash the hopper lid (1), bean hopper (2), and grounds bin warm, soapy water. Let air dry. Do not wash the ring burr in water or it will rust. - Page 6 ADJUSTING THE GRIND SIZE The grind settings on the Encore go from very coarse (grind setting 40) to very fine (grind setting 1). To adjust the grind size, rotate the hopper so that the silver grind setting indicator on the hopper is aligned with the desired grind setting. When adjusting the grind setting, the grinder must be running or completely empty of beans to prevent damage to the grinder.
-
Page 7: Care & Cleaning
ENCORE OPERATIONS MANUAL ® CARE & CLEANING REMOVING THE HOPPER Remove all coffee beans from the hopper and grind any remaining beans through using either the On/Off switch or the pulse button. Unplug the grinder from the power outlet before removing the hopper. - Page 8 ENCORE OPERATIONS MANUAL ® REINSTALLING THE RING BURR AND HOPPER Grip the grind adjustment tabs to ensure that the grind adjustment ring is rotated fully counterclockwise. Insert the ring burr with the red burr lifting tab aligned with the red indicator on the grind adjustment ring. These red indicators should be close to grind setting 30.
-
Page 9: Warranty & Service
The customer is responsible for paying the freight charges and For Parts and Information go to: www.baratza.com any duties and taxes for replacement parts that Baratza may send. The customer is also responsible to provide any labor For Troubleshooting Help: required to repair the grinder.