Advertisement
Quick Links
ver. 1.1
How to: Circuit Board Replacement
Encore, Virtuoso, Preciso
Time: 10 min
Difficulty: Easy
Tools/supplies: Flat head screwdriver. Phillips driver. Torx size 10 driver.
Parts: Conical Circuit Board (SKU: 6082 [110v] / 6083 [220v])
Additional Resources: Case Removal (PDF/video)
*** Unplug the grinder from power supply ***
Flat head
Phillips
Circuit Board
Torx 10
SKU: 6082 [110v] / 6083 [220v]
Remove the case using our Case Removal guide.
www.baratza.com
support@baratza.com
rev. 5/2/2019
Advertisement
Related Manuals for Baratza Encore
Summary of Contents for Baratza Encore
- Page 1 1.1 How to: Circuit Board Replacement Encore, Virtuoso, Preciso Time: 10 min Difficulty: Easy Tools/supplies: Flat head screwdriver. Phillips driver. Torx size 10 driver. Parts: Conical Circuit Board (SKU: 6082 [110v] / 6083 [220v]) Additional Resources: Case Removal (PDF/video)
- Page 2 Unplug the motor and lift the gearbox/motor assembly from the chassis. *If the motor wires are soldered to the circuit board, a new board-to- motor connector wire will be required. www.baratza.com support@baratza.com rev. 5/2/2019...
- Page 3 These may Remove the two screws be Phillips, or securing the circuit board T-10 screws. to the chassis. Plug in the connector for the power cable. Install the new power board. www.baratza.com support@baratza.com rev. 5/2/2019...
- Page 4 Pg. 4 Install the gearbox/motor assembly and plug the motor cable to the board. Route the safety interlock cable between the chassis and gearbox as pictured. Secure the three screws which mount the assembly to the chassis. www.baratza.com support@baratza.com rev. 5/2/2019...
- Page 5 Reinstall the case and knob to return the grinder to operation. For case alignment troubleshooting, see our Case Removal guide. If you have questions, or encounter issues with this guide, please reach out to support@baratza.com www.baratza.com support@baratza.com rev. 5/2/2019...