Advertisement
Quick Links
ver. 1.0
How to: Motor Replacement
Maestro, Maestro Plus, Preciso, Encore, Virtuoso, Virtuoso+,
Time: 25 min
Difficulty: Moderate
Tools/supplies: Flat head screwdriver. Phillips screwdriver. T10 screwdriver.
Metric Hex Wrenches (3 and 4mm). Cloth or rag.
Parts: Motor (SKU6026)
Additional Resources: Case Removal (PDF/video)
*** Unplug the grinder from power supply ***
Remove the case using our case removal guide.
Flat
T10
Pliers
Cloth
Phillips
www.baratza.com
support@baratza.com
rev. 4/16/2019
Advertisement
Related Manuals for Baratza Maestro
Summary of Contents for Baratza Maestro
- Page 1 1.0 How to: Motor Replacement Maestro, Maestro Plus, Preciso, Encore, Virtuoso, Virtuoso+, Time: 25 min Difficulty: Moderate Tools/supplies: Flat head screwdriver. Phillips screwdriver. T10 screwdriver. Metric Hex Wrenches (3 and 4mm). Cloth or rag. Parts: Motor (SKU6026) Additional Resources: Case Removal (PDF/video) *** Unplug the grinder from power supply *** Remove the case using our case removal guide.
- Page 2 Unplug this *If the motor wires are hard-wired to the circuit board, mark which color wire goes to each terminal to prevent the burr from spinning the wrong way after reassembly. It should spin clockwise. www.baratza.com support@baratza.com rev. 4/16/2019...
- Page 3 Connect the red wire to the spade with the L shaped base to ensure proper polarity and clockwise burr rotation. www.baratza.com support@baratza.com rev. 4/16/2019...
- Page 4 Motor screws, motor shaft, and bushing for drive shaft form a line. Install the motor/motor plate into the gearbox housing. Fourth screw Tighten the screws in an behind motor X pattern to ensure even tension. www.baratza.com support@baratza.com rev. 4/16/2019...
- Page 5 Route these wires behind chassis screw Re-seat the safety interlock switch onto its posts. Ensure that the button side faces inward, and that the two posts are flush with the top of the switch. www.baratza.com support@baratza.com rev. 4/16/2019...
- Page 6 If you encounter any issues with re-installing the case, refer to our Case Removal Guide for re-installation troubleshooting. If you have any questions, or encounter issues with this guide, please contact support@baratza.com www.baratza.com support@baratza.com rev. 4/16/2019...