Electrical Parts Section - Makita DFT087F Repair Manual

Electrical parts section

8-2
1 LED circuit A
2 Sensor circuit
3 Stator
4 LED circuit B
5 USB circuit
6 Switch
7 Buzzer circuit
Fix the following Lead wires in this groove:
15
 LED circuit A lead wires/LED circuit B lead wires/Sensor circuit lead wires/USB circuit lead wires/Lead wires for Stator
16 Be careful not to put Lead wires on/under Buzzer circuit.
Place Line filter, Connector (for LED circuit A, LED circuit B, Sensor circuit, USB circuit and Buzzer circuit) and Connector with Tape
17
in Space A.
18 Be careful not to put Lead wires under the protrusion of Controller.
19 Place Connector (3-pin/No connection) in Space A if there is no opening A in Housing L (See next page.).
1
15
16
17
12
19
17 / 35
Fig.45
2
7
9
13
8 Line filter
Connector (for LED circuit A, LED circuit B, Sensor circuit,
9
USB circuit and Buzzer circuit)
10 Connector with Tape
11 Protrusion of Controller
12 Space A
13 Controller
14 Connector (3-pin/No connection)
3
6
8
10
11
18
14
4
5