Assembling - Makita DFT087F Repair Manual

[2]

Assembling

6-3-2
[1]
[5]
Fig. 28
[3]
[1]
Fig. 29
[2]
Fig. 30
[2]
[1]
[3]
[4]
Fig. 31
[1]
[2]
[3]
7
Remove Steel balls 4 [1] (3 pcs) and Steel balls 5.0
[2] (3 pcs), then remove Cam D [3].
1
Assemble Cam D [2] to Spindle [1].
Apply the specified grease to the threads of Spindle
[1].
2
Assemble the following parts to Cam D [1] and
Spindle [2]:
 Steel balls 4 [3] (3 pcs)
 Steel balls 5.0 [4] (3 pcs)
 Cam F [5]
Apply the specified grease to the following parts:
 Steel ball 4 [3]
 Steel ball 5 [4] (for fall-off prevention)
 The cam portion of Cam F [5]
3
Assemble Steel balls 4 [3] (7 pcs) between the
groove of Spindle [1] and the depression of Cam F
[2].
Apply the specified grease to Cam F [2] and Steel
balls 4 [3] (7 pcs).
11 / 35
Note
Note
Note