Safety Instructions; Symbols And Icons - Grizzly ELS 3027 E Translation Of The Original Instructions For Use

GB
Air suction volume ............. max.14 m
Chopping rate .....................................15:1
Collection bag ....................................45 L
Protection class ..................................
Protection category............................ IPX0
Weight ................................ 2,7 kg / 3,7 kg
Sound pressure level
(L ) .................... 88,1 dB (A), K
pA
Sound power level (L
guaranteed .............................103 dB(A)
measured .... 100,3 dB(A); K
Vibration (a )
h
handle .............. 2,332 m/s
auxiliary handle .. 2,279 m/s
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration
of conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
Warning:
The vibration emission value may
differ during actual use of the
power tool from the stated value
depending on the manner in which
the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched
on but running without any load).
68
/min
3
= 3 dB
pA
)
WA
= 2,01 dB
WA
; K= 1,5 m/s
2
; K= 1,5 m/s
2

Safety instructions

This section describes the basic
safety rules when working with the
II
device.

Symbols and icons

Symbols on the appliance
Warning!
Read the manual.
2
2
Danger due to materials
blown out of machine!
Remove persons in the
vicinity from the danger
area.
Caution.
Rotating impeller wheel.
Keep hands away.
Remove the power plug be-
fore maintenance and repair
work.
Remove the plug from the
mains. Immediately if the ca-
ble is damaged or cut.
For saftey reasons, make
sure that the safety cover
over the suction opening is
securely mounted!
For safety reasons, both
parts of suction tube and
collection bag must be as-
sembled correctly, prior
starting the device.
Wear eye protection.