Power Supplies - Cisco 5000 Series Hardware Installation Manual

Cisco Nexus 5010 Switch
S e n d d o c u m e n t a t i o n c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
A
B
C

Power Supplies

The Cisco Nexus 5010 switch uses a front-end power supply. The chassis has slots for two power
supplies. Two power supplies can be used for redundancy, but the Cisco Nexus 5010 switch is fully
functional with one power supply.
power status and one for failure condition.
Figure 2-34
1
Table 2-8
Table 2-8
Power Supply Condition
No AC power to all power supplies.
Power supply failure, including overvoltage, overcurrent,
overtemperature, and fan failure.
Cisco Nexus 5000 Series Hardware Installation Guide
2-28
Group 1, ports 1 through 8: 10-Gigabit
Ethernet and 1-Gigabit Ethernet capable
unencrypted ports
Group 1, ports 1 through 16: Unencrypted
Ethernet ports
Group 1, ports 17 through 20: Encrypted
Ethernet ports
Power Supply for the Cisco Nexus 5010 Switch
1
2
Amber fail LED indicates a failure condition. 2
table describes the status of the two power supply LEDs.
Power Supply LED Descriptions
Group 2, ports 1 through 8: Fibre Channel
D
ports
Figure 2-34 shows the power supply, which has two LEDs: one for
Green power LED indicates the power status.
Power LED Status
Off
Off
Chapter 2 Cisco Nexus 5000 Series Overview
Fail LED Status
Off
On
OL-15902-01