Switch Hardware Best Practices; Installation Best Practices; Initialization Best Practices; Switch Operation Best Practices - Cisco 5000 Series Hardware Installation Manual

Switch Hardware Best Practices

S e n d d o c u m e n t a t i o n c o m m e n t s t o n e x u s 5 k d o c s @ c i s c o . c o m
Switch Hardware Best Practices
Use the recommendations in this section to ensure the proper installation, initialization, and operation
of the switch.
This section includes the following topics:
•
•
•

Installation Best Practices

When installing the switch, follow these best practices:
•
•
•
•

Initialization Best Practices

When the initial system boot is complete, verify the following:
•
•
•

Switch Operation Best Practices

To ensure proper operation of your switch, take the following actions:
•
•
•
•
Cisco Nexus 5000 Series Hardware Installation Guide
E-2
Installation Best Practices, page E-2
Initialization Best Practices, page E-2
Switch Operation Best Practices, page E-2
Plan your site configuration and prepare the site before installing the chassis.
Verify that you have the appropriate power supplies for your chassis configuration.
Install the chassis following the rack and airflow guidelines presented in this guide.
Verify that the chassis is adequately grounded.
Power supplies are supplying power to the system.
Fan modules are operating normally.
The system software boots successfully.
Make a copy of the running configuration to CompactFlash for a safe backup.
Always enter the copy running-config startup-config CLI command after you modify the running
configuration and ensure that the system is operating properly.
Never use the init system CLI command unless you understand that you will lose the running and
startup configuration as well as the files stored on bootflash:.
Keep backup copies of the running kickstart and the system images on CompactFlash.
Appendix E Troubleshooting Hardware Components
OL-15902-01