Connectivity Options-Transceivers And Cables; Transceivers; Supported Sfp Transceivers - Cisco 5000 Series Hardware Installation Manual

Cisco Nexus 5548P Switch
S e n d d o c u m e n t a t i o n c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
Table 1-3
LED
PSU Status
Indicators
Chassis Locator Front of chassis Identify selected
Connectivity Options—Transceivers and Cables
The Cisco Nexus 5500 Platform supports a wide variety of 1- and 10-Gigabit Ethernet connectivity
options using Cisco 10GBASE SFP+ modules. In addition, the Cisco Nexus 5548P supports 1-Gigabit
Ethernet connectivity options using 1GBASE SFP modules, 8-, 4-, and 2-Gbps Fibre Channel SFP+ and
4-, 2-, and 1-Gbps Fibre Channel SFP interfaces are supported with expansion module options.
This section includes the following topics:
•
•

Transceivers

The high bandwidth of 10-Gigabit Ethernet poses challenges to transmissions that are met by the
transceiver and cabling options supported by the Cisco Nexus 5500 Platform. Table
supported transceiver options.
Cisco SFP
FET-10G
Cisco SFP-10G-SR
Cisco SFP-10G-LR
Cisco SFP-H10GB-CU1M
Cisco SFP-H10GB-CU3M
Cisco SFP-H10GB-CU5M
Cisco GLC-T
Cisco GLC-SX-MM
Cisco GLC-LH-SM
Cisco SFP-GE-T
Cisco Nexus 5000 Series Hardware Installation Guide
1-12
LEDs for the Cisco Nexus 5548 Switch (continued)
Location
Power supply
(front)
Transceivers, page 1-12
Cables, page 1-14
Table 1-4
Description
10G SFP+ module for Cisco Nexus 2000 Series to Cisco Nexus 5000
Series connectivity
10GBASE-SR SFP+ module (multimode fiber [MMF])
10GBASE-LR SFP+ module (single-mode fiber [SMF])
10GBASE-CU SFP+ cable 1 m (Twinax cable)
10GBASE-CU SFP+ cable 3 m (Twinax cable)
10GBASE-CU SFP+ cable 5 m (Twinax cable)
1000BASE-T SFP
GE SFP, LC connector SX transceiver (MMF)
GE SFP, LC connector LX/LH transceiver (SMF)
1000BASE-T SFP, extended temperature range
Function Color
PSU Health Green
(multi color)
Amber
Blue
chassis
Supported Transceivers
Chapter 1 Cisco Nexus 5500 Platform Overview
Status Description
OFF No AC power to power supply
Solid On Power supply on and OK
Solid On Power supply failures, overvoltage,
overcurrent, overtemperature
1 Hz AC present, 3.3 VSB on,
blinking PSU is off
OFF Operating normally
Solid on Chassis is selected
off Chassis is not selected
Table 1-4 lists the
OL-15902-01