Table of Contents
Advertisement
Fig. 2
16
1
2
17
11
18
1 - Work stop x2
2 - Work support x2
3 - Quick release saw mounting
bracket x2
4 - Top rail
5 - Frame support x1
6 - Handle x1
7 - Wheel x2
8 - Foot x2
TECHNICAL DATA
Work support range
Maximum load
Range of saw mounting bracket slots
Weight
wArNING!
read and understand all instructions. Failure to do so could result
in potentially serious personal injury.
Save all warnings and instructions for future reference.
MITrE SAw STAND SAFETy wArNINGS
Know your accessory. Read the operator's manual carefully. Learn its
applications and limitations, as well as the specific potential hazards
related to this accessory.
This stand is designed to be used on a flat, stable surface. Do not
use the product on an uneven or unstable surface. Be sure to allow
enough room to handle and properly support the workpiece.
Take care when assembling or adjusting the stand, not to trap fingers
or hands between the moving parts.
Make sure all bolts and connecting elements are firmly tightened.
Proper assembly is important to prevent the risk of a collapse of the
stand.
4
12
10
9
4
14
7
15
6
9 - Bolt (M6 x 60mm) x2
10 - Bolt (M8 x 30mm) x4
11 - Handle bolt (M8 x 45mm) x2
12 - Bolt (M8 x 50mm) x4
13 - Foot bolt (M8 x 55mm) x2
14 - Frame bolt (M10 x 55mm) x2
15 - Axle bolt x2
16 - Work stop adjustment knob x2
17 - Height adjustment knob for work support x2
MobILE MITrE SAw STAND
24
23
LOOSE PARTS
21
3
19
19
22
18 - Acorn nut x2
19 - Lock nut (M10) x4
20 - Wing nut (M8) x2
21 - Hex nut (M8) x4
22 - Wheel washer (ID10 x OD26 x 2t) x2
23 - Lock washer (M8) x4
24 - Flat washer (M8) x4
If any parts are missing, do not use the stand until the missing parts
are replaced.
Do not connect to a power supply until assembly is complete. Failure
to comply could result in accidental starting and possible serious
personal injury.
Do not overload. Maximum weight of the mitre saw and workpiece
together must not exceed 136 kg. Maximum loading on work support
must not exceed 136 kg.
Do not modify or use this stand for any purpose for which it is not
intended. Follow any mounting instructions very carefully. Failure to
secure properly is likely to result in serious personal injury.
Follow the mitre saw and stand mounting instructions carefully, and
ensure the mitre saw is fastened securely and avoid any gravity shift.
Always ensure the mitre saw is mounted securely and is stable before
connecting to a power supply.
To reduce the risk of injury from the mitre saw moving or falling from
the stand, always check that all mounting bolts and nuts are securely
4
5
20
8
13
PSUM1000
1170 - 2790 mm.
290 - 435.5 mm.
136 kg.
27 kg
Advertisement
Table of Contents
