General Maintenance - AEG PSUM1000 Original Instruction

MAINTENANCE
When servicing use only original replacement parts. Use of any
other parts may create a hazard or cause product damage.
Always wear eye protection with side shields. Failure to do so could
result in objects being thrown into your eyes resulting in possible
serious injury.

GENErAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most plastics are
susceptible to damage from various types of commercial solvents and
may be damaged by their use. Use clean cloths to remove dirt, dust,
oil, grease, etc.
Do not at any time let brake fluids, gasoline, petroleum-based
products, penetrating oils, etc., come in contact with plastic parts.
Chemicals can damage, weaken or destroy plastic which may result
in serious personal injury.
Do not modify the product in any way or use accessories not
approved by the manufacturer. Your safety and that of others may
be compromised.
Before and after each use, check the product for damage or broken
parts. Keep the product in top working condition by immediately
replacing parts with spares approved by the manufacturer.
When servicing, use only identical replacement parts. Use of any other
parts may create a hazard or cause product damage.
Periodically check all fasteners for tightness. Retighten as necessary.
Do not make any adjustments to the stand while the mitre saw blade
is in motion.
To assure safety and reliability, all repairs, including changing brushes,
should be performed by an authorised service centre.
For greater safety and reliability, all repairs should be performed by
an authorised AEG service centre.
Use only AEG accessories and spare parts. Should components need
to be replaced which have not been described, please contact one of
our AEG service agents (see our list of guarantee/service addresses).
If needed, an exploded view of the product can be ordered. Please
state the Article No. as well as the machine type printed on the label
and order the drawing at your local service agents or directly at:
Techtronic Industries Australia Pty Ltd
PO Box 1065
Mount Waverley VIC 3149
Tel. no. 1300 234 797
Australia
Techtronic Industries N.Z. Limited
PO Box 12-806
Penrose AUCKLAND 1642
Tel no. 0800 234 797
New Zealand
14
wArNING
wArNING
wArNING
wArNING
SyMboLS
Safety alert
Please read the instructions carefully before
starting the product.
Do not reach into the gap. Beware of pinching.
Wear eye protection.
136
Do not exceed 136 kg.
Do not stand on top or use as ladder.
Do not sit on top.
14