Clear Counters - Cisco 1503 Software Manual

clear counters

Syntax: clear counters {stack | hub [hub id] | port [hub id] [port id] }
Mode: Administrator
Description: Clears all accrued statistics for the specified stack, hub, or port, or a
combination of these.
Command Keyword Definitions
• stack—Clears statistics for all ports on all hubs in the stack.
• hub—Clears statistic for the specified hub. If no hub is specified, statistics
are cleared for all hubs in the stack.
• port—Clears statistics for the specified port on the specified hub. If no port
is specified, statistic are cleared for all ports in the stack.
• hub id—(Optional) Number used to identify the hub in a stack. An integer
between 1 and 5. Read the section "Hub ID Numbers" earlier in this chapter
for information about how to determine hub ID numbers.
• port id—(Optional) Port number that is shown on the rear panel of the hub.
A value from 1 to 8.
Statistics Commands
Using Your Hub Software 3-43